Internet

4 tips to avoid interference in your home WiFi network

In order to have a good quality of the Internet connection, something essential is to avoid interference in the Wi-Fi. This could be the cause of the annoying crashes, loss of speed and general problems with browsing. What can we do to prevent it? In this article we are going to give some recommendations for avoid Wi-Fi interference and make it work in the best possible way.

Tips to avoid Wi-Fi interference

There are certain factors that can affect the wireless network. You can suffer from interference that will prevent the signal from reaching it correctly and that you can navigate without annoying cuts and continuous failures. But normally this can be solved in a simple way.

Move the router away from other devices

An important point is to move the router away from any other electrical device, especially those that can use a similar frequency. For example, you should move it as far away as possible from a microwave or devices that use Bluetooth, since they work on the 2.4 GHz frequency and that can affect Wi-Fi.

Therefore, the ideal is to put it in an isolated location, away from other devices and always in a place from which it distributes the connection well. The center of the house or an area from where you are going to connect the most, are good places to place it.

Change the Wi-Fi band

Another method to avoid Wi-Fi interference is change the band. Especially you will have more interference if you connect to the 2.4 GHz band, so switching to 5 GHz can make the connection go better, without causing problems. Of course, you can only do it if you have dual band devices.

Although this can be a good solution, you should also keep in mind that the 5 GHz band has less range. It may be that from where you are going to connect it does not arrive well and also goes wrong.

Differences between 2.4 and 5 GHz

choose another channel

Especially in the 2.4 GHz band This is when there may be more interference problems with other devices and even with our neighbors. It has a series of channels that you are going to connect to, which are overlapping. That is, if you connect to channel 3 and that channel is very saturated, you could have problems. Also if you connect to 2 or 4, which are nearby, you may have difficulties.

In this case, our advice is to choose the best Wi-Fi channel. This way you can connect to the one that is freest and not have problems getting the connection to work correctly.

Place the repeaters well

Do you connect through Wi-Fi repeaters? In that case you could also have interference problems. It is essential that you place them well, that you know at all times what can affect the quality of the signal and avoid leaving them exposed to problems that they may suffer without you realizing it.

As in the case of the router, our advice is to place them in an area isolated from other devices. Always avoid appliances and devices that can reduce the quality of the signal and thus make it work as well as possible.

In short, as you can see there are different factors that you can take into account to avoid Wi-Fi interference. It is important that you follow these steps to ensure that the signal reaches the best possible and that you do not have problems when browsing the network.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *