Surely many times you have thought that you would like to have control of the status of your PC at a glance and without having to have any program in the background that does not show you anything that is happening because it does not overlap on your desktop. Well let us tell you that Lamptron has the solution to this with its new HM070 Flipa real-time control system for your hardware that integrates an LCD screen and can be used both inside and outside your PC.
It’s unlikely that when you get to know this device you won’t like it, because I’m sure that whether it’s inside your PC or on your desktop, having control of your hardware in real time is something that everyone likes. But if on top of that it is real-time, customizable and does so based on one of the best-known software for such a task… We have a winning combination.
Lamptron HM070 Flip: monitoring your hardware on one screen
Actually, this control accessory is the second version of itself, since Lamptron launched the HM070 Lift on the market, so this Flip version comes to accompany it and give it a new look. The differences are quite obvious, since here we have a practically identical base, but the screen is located with it in a 90 degree angle vertical.
The main advantage of this new HM070 Flip is that it can be used both inside your PC and outside, which is a clear advantage as far as your setup is concerned. What we have in hand is a 7-inch screen with dimensions of 165mm x 110mm (182.5 mm x 130 mm x 30 mm (125 mm) in total to be exact with the device) which integrates a resolution of no less than 1024 x 600 with a refresh rate of 60 Hz.
Synchronization with AIDA64 in real time
Having said that, the best thing without a doubt is the support that it gives you AIDA64 as software to be able to show the data of our hardware in real time. This is important, because we have one of the main programs in this regard and logically that gives a lot of peace of mind. In addition, we will not have to worry about having to launch the program and always configure this HM070 Flip, not at all, everything is automatic and starts by itself.
Depending on the brand, this device is connected to a HDMI and USB port, so they are necessary to be able to install it. Apparently the dual screen function will have to be activated for it to work correctly, since the video output is output through said HDMI and it makes sense for this to happen this way since the interface is customizable and can be changed by configuring 5 different skins to our liking.
The Lamptron HM070 Flip is a hardware monitoring device that is constantly being updated and therefore it will always be plugged into a 5 volt Micro USB connector, either internally inside the chassis or externally on our desk, which is interesting. to always have the best support and bug fixes.
Regarding its availability and price, Lamptron has not revealed anything yet, but given its official presentation, it is likely that we are talking about an immediate arrival.
