Tech

Do it yourself: how to maintain and fix your electric scooter

The basic thing you must have to be able to maintain your scooter is a Allen key set. They are very cheap, and can save you from many troubles. Most electric scooters use these types of keys. However, do a check before launching the purchase just in case.

tire maintenance

scooter wheel puncture.jpg

Without a doubt, the element to which you should pay the most attention. A flat tire it can ruin your day. On most scooters, swapping one tire for another can be tricky, especially the one on the drive wheel. Therefore, it is convenient for you to take care of it so as not to have to have a bad drink. the wheels are wear items, but you are going to have to do many kilometers before having to replace them. Scooter tires leak Pressure little by little, exactly like in cars.

To avoid a puncture, you must have your wheels at the proper pressure. Each scooter model has a type of tire and a recommended pressure. The more you weigh, the more pressure you should put on the wheel. On the Internet you can find recommendation tables that will give you an idea of ​​how much pressure you should put in each specific tire based on your weight. As a guideline, a user of about 60 kilos with a Xiaomi Mi Electric Scooter 1S scooter with standard wheels (8 1/2 inches) can put 3 BAR of pressure in the front wheel and 3.3 BAR in the rear of the scooter. With the right pressure, you will prevent the tire from being soft when going over a branch or a hit with a curb bursting the inner tube of the tire.

To do this maintenance, the ideal is to have a automatic inflator. In this case there is no better product than the xiaomi inflator. It has a battery, you can carry it in any backpack – although it weighs a bit – and you can inflate a tire without effort. It is recommended to measure the tire pressures every two or three weeks if you do not use the scooter much or every week if you use it very intensively.

brake maintenance

brake xtech xiaomi

The brake is another important element of the safety of your scooter. We recommend that you adjust the retention of the electric motor of your scooter to the maximum. In this way, you will have to use it as little as possible, and it will last longer. However, as a wear part, it will lose performance over time. This is what you should do to ensure your safety:

Brake disc

disc brake scooter.jpg

With use, your scooter’s brake disc can bend with use. You will notice it because you will begin to hear an atrocious squeak, and people on the street will look at you with a frown.

In these cases, there three options what can you do:

  • adjust the screws to separate the brake caliper from the disc and stop rubbing. It is not ideal, because now when you have to brake, you will have to press the brake lever more sharply.
  • rectify the diskNote: If you have the right tools, you can use a sander to straighten the disc.
  • replace disk: It is the most suitable option, since these discs are quite affordable. You will simply have to look for a replacement equivalent to the original.

brake pads

It’s not usual, but can be spent. In this case, the tablets are usually sold in large packs, and are usually quite cheap. To avoid wearing out the pads, the correct thing to do is to adjust the retention of the scooter’s motor to the maximum. By doing so, you’ll have to pull less on the brake, and the pads will last longer.

adjust the brake

xiaomi brakes.jpg

Your record may not bend, but you may still hear the squeak. This is because you have to adjust brake bite from time to time.

To do this, loosen a little with the Allen key the screw that holds the brake cable. Now, press the brake lever to the maximum and without releasing, tighten the screw again. Check by turning the wheel by hand to make sure that no longer rubs the disc. If you haven’t fixed it, it’s possible that the brake caliper is twisted, or that the disc is bent.

Good charging habits

load scooter

Changing the battery of a scooter can be expensive and also an impossible operation in some models. Therefore, it is important to take care of it.

For it, Avoid stress. Start your ride by pushing the scooter well with your leg on the ground to avoid unnecessary strain on the battery.

Also do not take your vehicle to Extreme situations. Try as much as possible not to take it to very low battery percentages, as this quickly degrades the lithium cells. In the same way, you can disconnect the charger when you have the scooter over 90%. Cutting the load ahead of time can also help extend its useful life.

Other security elements

You can’t forget about these other aspects either.

correct address

You also have to review other aspects of the scooter. If you hit a curb hard, for example, it might happen that the axle of your scooter bends. With the handlebar straight, the front wheel of your vehicle will not be straight.

This problem can be corrected with the same Allen keys, removing the mast at the point where it folds and putting the bearing back in place. In case it is damaged, you should replace it.

reflectors

scooter relectors.jpg

The side reflectors of your scooter can fall off due to vibration. If it happens to you, you should buy spare parts and install them as soon as you realize it.

Other ways to prevent punctures

liquid slime.

There are the rigid wheels, which will mean that you never have to worry about blowing a wheel. However, their use by city does not convince us, and we do not recommend that you install them.

Rigid wheels have worse grip, they transmit shocks and vibrations more and can be a danger if you go over a wet surface.

In this case, there are two better solutions:

  • 10-inch wheels: Many scooters can be modified to carry larger wheels. You will have less autonomy —because the contact surface increases—, but you will gain in safety and comfort. It is recommended that you go to a specialized store to have them installed. Also take advantage of the visit to level up your brakes and install a double piston caliper.
  • anti-puncture fluid: you shouldn’t need it, but if you’re afraid of getting a flat one day and being left in the middle of nowhere, you can use solutions like SLIME liquid. It is a compound that is inserted into the air chamber and that will seal a puncture as soon as it occurs. The product is very affordable and you can use it to prevent a disaster if you see fit.

Links to Amazon in this article are part of our agreement with your Associates Program. They could report us a commission for their sale (without this affecting the price you pay). The decision to publish and add them has been taken, as always, freely and under editorial criteria. We do not respond to requests from the brands involved.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *