Why Wi-Fi LED Bulbs Burn Out
you buy one Wi-Fi light bulb to be able to control it remotely, it works fine at first but after a short time you notice that it stops going. Suddenly it burns out and you can’t turn it on anymore. There are several reasons for this to occur. Logically, we refer to when they melt quickly, without it being normal.
You buy poor quality light bulbs
Undoubtedly one of the main reasons why LED bulbs burn out, especially the smart ones, is because you buy a shoddy model. We see an offer on the Internet, it seems very cheap and we buy it. They can even come in a pack of several.
The problem is that, as with any low-quality device, they do not last as long as a more reliable one. That will cause it to stop working after a while and you have problems.
You misplace the bulbs and they overheat
You should also keep in mind that the heat it is not good for LED bulbs. It is necessary that they have good cooling, especially in the summer months, when there may be a higher temperature and problems of this type appear.
Ideally, you should not put them near any appliance that can generate heat. If it is a bulb that you put in the ceiling, you will not have so many problems. But if it is a lamp that you can move and place in different places, avoid putting it in an area where it can receive heat.
You use misconfigured or bad smart switches
The smart plugs and switches They are very useful for remotely controlling appliances and also light bulbs. You can directly decide when any home light turns on or off even if you are not at home at that time. But this could cause problems.
The main reason is to use a bad switch. That can lead to outages and problems. It may shorten the lifespan of LED bulbs and may cause it to burn out earlier than normal. You can always use PLC devices so that the signal reaches these smart plugs better.
Abuse smart bulb features with Wi-Fi
Smart LED bulbs have a wide range of functions. For example, you can synchronize them with music, change color from your mobile, use voice commands to turn them on or off, etc.
The more you use these features, the more the light bulb has to work. That can also cause it to stop working properly, especially if it is not of good quality. It is the same as it would happen with any other device that you are constantly putting to maximum performance.
In short, if you have problems with your LED bulbs and you see that they burn out very quickly, check what we have mentioned. You may be making a mistake and you can achieve a longer life for your light bulbs at home.