Computer

Is your computer prepared for a serious failure? Check it

When the fateful moment comes, no one likes their Windows operating system to suddenly stop working due to some kind of error. However, these failures that are considered serious in the microsoft softwarethey can happen at any time, in fact, they usually appear at the most unexpected moment.

It is true that we can take certain precautions in order to try to alleviate the arrival of these serious problems on our team. Avoiding them completely is quite complicated, but we can try to avoid them or space them out more in time. With everything and with this, Microsoft itself is fully aware that most users, at one time or another, are going to have problems with the operating system. That is precisely why they include by default some functions that can be very helpful for us. recover windows.

Assuming there’s a good chance we’ll run into some serious bug here sometime in the future, let’s see if we’re prepared. Specifically, we mean if we have Windows configured in such a way that we can solve that potential mistake when it occurs. Among the pre-installed features that help us solve these failures, one of them is system restore. To give us an idea of ​​what we are talking about, this is a built-in backup and restore function of the windows operating system.

It is part of this and it will help us to restore the system to a previous state that we have saved. Basically what we do is go back in time, to a stored point in which Windows had no problem and worked perfectly.

Recover Windows in case of serious failure

Of course, in order to take advantage of this functionality, it is essential that these restore points have been created in the past. All this that we are discussing can be very useful in certain critical situations. For example, in those in which we cannot conventionally access the operating system due to some type of problem.

We must bear in mind at this point that this is a system recovery function may be disabled. This would mean that automatic restore points will not be created, nor have they been created in the past. Therefore, in the event that we are faced with a serious bug in windows, we won’t be able to fix it using this useful built-in functionality. In the event that you have doubts, it is best to carry out this verification that we describe below. This is something that we can easily check through the system configuration application that we access through the Win + I key combination.

Here we are in the section called System, and in the left panel that appears on the screen, at the bottom we find a section called About, where we click. Now we take a look at the right panel and we will see a link that says system protection.

windows recovery

Here a list will appear in a new window with the disk drives that are part of our computer. This will give us the opportunity to see if the protection method of each of these hard drives is activated or not independently. In the event that the unit where the Windows system is installed is deactivated, we only have to click on the corresponding entry and change its status from the button Set up.

configure disk

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *