Little space on your desk for your PC? Look at this Nfortec box

The boxes have increased in size considerably, and you don’t have to go to a full tower to see it. The components are increasing and that in their majority respect the standards. But if it is not in thickness, it is in height and if not in width, so this means that if we look back a few years ago, the midtowers are the full tower of yesteryear. The new Nfortec Zetus arrives with a design that evokes that bygone era in terms of length, without losing the benefits of its youth and technology.

Nfortec Zetus, good ATX tower, nice and not very expensive, but compact

If there is something that characterizes Nfortec it is its value for money and this Zetus was not going to be an exception. We are talking (although it may not seem like it) of an ATX tower with unusual dimensions of 380mm x 210mm x 440mm, which gives it a surprising very light weight of only 5.1 Kg.

And let’s not think that this weight is due to the use of plastics, not at all, rather the opposite, since we have materials such as SPCC steel of an impressive 0.5 mm and tempered glass for your window. So we are talking about a well-built metal chassis that will allow us to keep the temperature of the components at bay thanks to the possibility of including up to three 120 mm fans on the front, one on the front (included and with A-RGB) and two 120 or 140 mm on the ceiling.

As we have seen, its height is moderate, so it only allows a 360 mm radiator in the front and a 120 mm in the rear, leaving the roof free only with fans. As for bays for the HDD / SSD, we have 2x 2.5 ″ + 2x 3.5 ″ / 2.5 ″, being a total of 7 expansion slots with two verticals for GPUs.

High-end Dust Filters, Heatsinks, PSUs and GPUs


What you are surely wondering are the installation possibilities as such as it is such a compact tower. And it is that this Nfortec Zetus surprises, since it allows ATX PSUs of up to 180 mm, GPUs of up to 340 mm and heatsinks of up to 165 mm in height.

As for its design itself, we are talking about a clean and elegant front with A-RGB that has a series of openings that allow the correct flow of air. As we know, we have the possibility of installing GPUs vertically, which is surprising due to its measurements and it also gets two dust filters, one on the ceiling and one on the bottom for the PSU.

What about its availability and price? It will be offered on the official Nfortec website from 8/13/2021 (pre-order available) and will shortly arrive at PcC and Amazon, yes, without a specific date. The price at which it is listed is reflected as 64.95 euros and will come in two different colors: black and white, at the user’s choice.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *