Have a good wifi connection it is not always possible. Sometimes we see that we do not receive a good signal and that prevents us from watching Streaming videos, uploading files to the cloud or browsing on a daily basis. But you can always take into account some key factors to avoid problems. Therefore, in this article we are going to explain what you should check to find out if your Wi-Fi works perfectly or not. The objective is to have good speed, stability and that there are no complications.
What to check so that the Wi-Fi goes well
Sometimes little changes they can do a lot for the connection to improve. Maybe you are connecting to the wrong band, for example, and that is going to prevent the Wi-Fi from going perfectly. Therefore, carefully review the points that we are going to show you so that you know at all times what you can do to optimize the connection.
You connect to the right band
The first thing to check is whether or not you are connected to the correct band. Most devices can connect to both 5 GHz and 2.4 GHz. However, it is important to choose carefully which one we are going to connect to, since that will make us have better or worse coverage, as well as more or less lower speed.
In general terms we can say that the 5 GHz band is the fastest. Of course, keep in mind that it is the one with the least coverage. Therefore, it is ideal if you are going to connect near the router and you want your Internet to go as fast as possible to be able to download files, use the cloud, etc.
Instead, the 2.4 GHz band it has greater coverage, more stability and the speed is lower. It is the best if you are going to connect further away from the router and what you are looking for is for the connection to work without problems, without the dreaded continuous cuts appearing. Of course, it is also the one that can have the most interference.
The signal is fine
Of course, something you should check is that the signal reaches where you need to connect. You can see what power comes to you in a very simple way. To do this, just go to Start, enter the Command Prompt and execute the following command: netsh wlan show interfaces.
You will see a list with information regarding your connection. For example, you will be able to see the network name, the band you are connected to, or the type of encryption. You will also see a section that says Signal. It’s basically a number that goes from 0 to 100 and shows you a percentage. The closer to 100, the better. That means the signal is stronger.
no speed issues
Another important point that you should check is the speed. To consider that the Wi-Fi works perfectly, it is necessary to have a good speed. Logically, it will never work as if you were connected to the router, but it is important that the speed drop as little as possible when you connect from further away.
To know if the speed is correct, what you should do is a speed test. Test how much it reaches you and see if it is close to what you would expect or if it is very far from what you really have contracted.
In short, as you can see, you can review some key points to find out if your Wi-Fi works well or not. Seeing what we have explained will help you avoid problems and make everything work as well as possible.
