Have a stable internet connection, it is essential to be able to download content, watch streaming videos without interruptions, make video calls, etc. If you notice that your connection is not stable, this could be due to different causes. For example, you could be very far from the access point, have problems with the cabling, with the network card, your connection in general… But, what can you do to see if you have a stable connection or, on the contrary, it may be problematic? We are going to tell you some options.
The goal is for you to know if you need to make any changes to improve the quality of the connection, if you have a problem with the line or anything that prevents achieving that stability. Simply with these simple tests that we are going to show, you can get a pretty good idea.
Test if the connection is stable
To consider that a connection is stable, the main thing will be that there are no interruptions. It will also be important to have good speed or latency. Simply with the normal use you give to the connection, you could easily detect problems. These problems could be general, on all your devices, but also on specific devices.
Speed test
Something basic is to test the Internet speed. When making a speed test, you will see how the rise or fall is. But you will also be able to observe latency, something essential for stability. If that ping or latency is too high, you would not be able to play online games or make video calls normally.
You must analyze what you have contracted and how much you get, but also the circumstances of that test. That is, being connected by cable or right next to the router is not the same as accessing Wi-Fi from a very distant room. In the latter case, it is more likely that there will be cuts and you will have problems.
To make Ping
This test is very useful to see the stability of a connection. You can detect lost packets, which means that the connection is not stable and there are problems. You will have to use the Windows command line, but it is a fairly simple process and does not require much time.
To start this test, you have to go to Start, open the Terminal or Command Prompt, and run the command ping -t domain. For example, you can run ping -t 8.8.8.8 to test Google’s servers. The ideal is to leave the command running for as long as possible, as this will help you rule out errors. Maybe you do the test for 2 minutes, for example, and it comes out fine. On the other hand, if you leave it for an hour there may have been packet loss.
Detect cuts when watching videos
A sign that is usually quite visible is when you are watching a streaming video, for example on YouTube or Netflix, and you notice that it cuts off. This happens constantly and you don’t know what could be happening. This may indicate that your Internet connection is unstable and, therefore, has limitations so that you can play quality content.
However, this could occur for other reasons, such as having poor signal quality, a specific failure with that platform, etc. Ideally, you should be able to test it with multiple devices, as well as multiple platforms, and check for outages when watching videos online.
See if it disconnects
You may notice that some device keeps disconnecting. It can be the computer, mobile or any other. You are browsing normally, but you see that it suddenly disconnects and you have to reconnect to the network. If this happens frequently, it may be a clear sign that the connection is not stable.
This is a problem, since continually disconnecting can cause you to waste time, cancel downloads, or have problems using certain online services. It is key to detect this as soon as possible and be able to take action.
In short, with these signals you can see if your Internet connection is stable or not. You can always measure the stability of the connection and anticipate problems. Making changes and adjustments can help you get everything working correctly and avoid problems.
