have a WIFI repeater It is one of the options to improve the wireless network in a home. There are many models available, with different features and prices. However, there are mistakes that we often make and they will cause it to not work correctly. In this article we are going to talk about it. We are going to explain what you should avoid in order to achieve a good speed, with a signal in the area where you need good Internet.
Keep the Wi-Fi repeater away from interference
The problem is to put the repeater near possible interference. That will make it not work correctly and you will have problems to offer a good connection to other devices. If there is interference, the signal will be weak and also you will not reach a good speed.
What can cause interference? For example, it’s a bad idea to put the Wi-Fi repeater near headphones and other devices that work via Bluetooth. By using the 2.4 GHz band, the signal could be affected and it’s going to perform significantly less than it could. Keep in mind that Wi-Fi devices can connect through the 2.4 GHz and 5 GHz bands in most cases, but it is the first option that we usually use to connect from further away.
They can also cause interference other appliances such as a microwave. If, for example, you put the repeater in the kitchen and the microwave is nearby, it could cause interference. You will see that the connection works worse when this device is turned on. Better get it as far away as possible. Even a washing machine could affect it, since water does not do well for Wi-Fi.
Choosing a good place is essential
Therefore, as you can see, choosing the right place for the Wi-Fi repeater is very important. But be careful, you should not only move it away from possible interference, but also place it in a area where you are really going to take advantage of the signal. We are going to give you some additional recommendations so that you get the best connection.
Ideally, the Wi-Fi repeater should be in a central zone of the house. This way you can better distribute the signal to other devices you want to connect, such as a television, computer, etc. However, if you only need a network at a specific point, you can install that repeater near there.
But there is a factor that you must take into account and that is that you cannot put it too far from the router. What the wireless repeater does is receive the signal from the router and then distributes it. If it is too far away, it will not be able to receive a signal correctly and that will prevent you from connecting other devices.
Choosing a good place is also avoiding objects that could weaken the signal. For example, you shouldn’t put it behind a piece of furniture or a thick wall. The fewer obstacles it has, the better the signal will be and you will be able to connect from further away without problems with coverage.
In short, as you can see, using Wi-Fi repeaters at home can greatly help you ensure that the wireless signal reaches other devices correctly. The goal is to have a good signal and amplify it. Do not make mistakes when locating it. Avoiding problems with the Wi-Fi repeater is key.
