For only €10 you will be able to know if an appliance in your house consumes too much light

In order to save on the electricity bill, something essential is to carry a control of what the connected devices spend. Logically there are some who consume much more than others. For example, the consumption of a refrigerator is not comparable to that of a lamp. However, sometimes there may be problems that cause a device to consume more than normal. In this article we are going to explain what you should do to detect if a device consumes too much light.

How to know if an appliance uses a lot of light

Let’s take a refrigerator as an example. It is one of the appliances that consume the most light. In fact, it is estimated that it can amount to over 30% of the bill in many cases. If you have a problem and spend more than usual, that can cause you to spend significant money each month. For example, it could have a failure to maintain the temperature or a deteriorated component and that causes a higher consumption.

The first thing you should do is look for information about that particular device. For example, look on the Internet for the exact model and see the specifications, look at the instructions, the label on the device itself, etc. That will show you the consumption so that you already have an idea of ​​what you should or should not spend.

From there, once you know how much that appliance should consume, for example 200 W, 400 W or whatever, you can use a consumption meter. Basically it is as if it were a socket, to which you are going to connect that device and it will be connected to the current. It will measure consumption in real time, it will show you graphs, etc.

This is very useful to know the specific consumption, at a given moment, but also to see how much you consume based on the level you set or according to certain conditions. For example, a stove, you can measure its consumption based on the level you mark.

You can see some consumption meters:

See the counter in real time

But even if you don’t want to spend money to buy a light meter, you can also go for the option of the real time counter. Of course, this alternative is especially useful when you are going to measure a device that really consumes a lot of light. For example, it can be an oven or a refrigerator. If you want to measure something that hardly consumes, it will be more difficult since there can always be phantom consumption.

what you have to do is disconnect all appliances that you have at home For this you do not need to go one by one disconnecting them, but you can help yourself with the magnetothermics of the house. You are going to download all of them, except for the only one that will be where you are going to have the appliance you want to measure connected.

Once you have all this ready, you simply have to access the real-time electricity consumption of your home. You can see it online, through the distributor. You can see at any time how much electricity you are consuming, measured in kWh. Since you have turned off everything except that device that interests you, you will be able to see how much it consumes.

You can also see it without having to turn everything off and then just see the difference when you turn on the device you’re interested in. But keep in mind that there are appliances that do not always consume the same, such as a refrigerator.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *