Internet

Know these common mistakes if you want to have the best Wi-Fi

Failure to use Wi-Fi limiting connection

They are usually typical errors that can be corrected if we simply change some habits or the way we configure the network. In this way we can obtain an important improvement that allows better navigation and not have errors that affect the connection.

Misplacing the router or repeaters

Undoubtedly the most common error for which Wi-Fi does not work well is misplacing the router. This can also happen with the wireless repeaters that we use. After all, the way in which these devices are going to distribute the signal and reach the places where we are really going to connect will depend a lot on where and how we place them.

What mistakes do we make when placing the router? The first is the Location in the house. Ideally, it should be in a central area, from where you can distribute the signal well. It is useless to put it at one end if then we are going to connect from another. We would not take advantage of the resources.

The way to place the appliance is also a mistake. That is, we should not place it in a low area, near walls or walls, as well as other electrical appliances. The most optimal thing is that it is in a high place, isolated and of course that there are no obstacles.

Not wearing the best band

Another very common problem is using the Wi-Fi band wrong. Most modern devices, as well as routers, can work in the 2.4 GHz and 5 GHz bands. We can say that the former is the one that works best if we are far from the router, although the speed will be more limited. The second, on the other hand, is the one that offers greater speed but is more sensitive to obstacles and distance.

This means that we must always choose the correct band to which we are going to connect. If, for example, we are using a mobile near the router and we mistakenly connect to the 2.4 GHz band, we would have a speed that would not be the best. On the other hand, if we are far from the access point and we maintain the 5 GHz band, we could have cuts and many limitations.

The router is outdated

Of course another mistake that many users make is having the outdated router. This will cause errors when connecting the Wi-Fi network, as well as being more vulnerable to possible attacks and having intruders on our networks.

Our advice is to always have the latest version of the router’s firmware, as well as any device that we connect to the Internet. This will go a long way to helping us achieve optimal performance and avoid problems. It is important to detect Wi-Fi outages and one reason may be this.

Using a bad Wi-Fi network card

On the other hand, another important piece in our connections is the network card that we use. If we have problems using Wi-Fi on a computer, it may be because we are using an internal wireless card. Many laptops have limitations in this regard. They do not have a network card that offers good coverage and speed.

What can we do to prevent it? A practical solution is to use an external Wi-Fi network card. This will undoubtedly help us to reduce problems as much as possible and we can achieve a better speed and have a more stable connection in general.

Therefore, these errors can weigh down the Wi-Fi connection. It is important that we avoid them and ensure that the Internet speed is adequate, with good stability for all the computers that we connect.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *