The Fridge We can say that it is one of the most consumed household appliances in a home. In fact, in some cases it can reach 30% or more of the total. Therefore, using it correctly is essential to save. In this article we will tell you about some small changes that you can make in the refrigerator so that spend less light. You will see that some simple adjustments can be very useful.
Adjustments in the refrigerator to save light
Note that not all refrigerators consume the same. If you have a very old model, the expense can be much higher than a modern one, with an A energy efficiency label. But even so, whatever model you have, you will always be able to make some small changes to pay less for electricity. .
correct temperature
The first thing is set the temperature correctly. Think that each degree of difference can mean 5% more consumption in some cases. Always guided by what the manufacturer says, we can more or less say that the refrigerator should be set between 5 and 7 degrees, while the freezer should be around -17 degrees.
You really do not need to have the refrigerator at a lower temperature, such as 3 degrees. That will cause you to consume more than necessary and it can be a significant amount if we calculate the whole year, since it is a device that we always have on.
Leave space between foods
This trick is very useful. Perhaps in your case you will not have problems if you have an almost empty refrigerator, but if you are one of those who store a lot of food, it is best that keep a good separation. That will allow it to refrigerate better and not have to use as much power to keep food cold.
Avoid as much as possible to save them in block. You can use the different trays to distribute the food and make the best use of the space and prevent it from sticking together. Same thing in the freezer.
Remove the ice layer from the freezer
Regarding the freezer, something fundamental is to avoid the generation of a ice cap. You should always check this as it could lead to higher consumption. As far as possible, the ideal is to remove the layer of ice before it reaches 3 millimeters thick. With that you can avoid unnecessary consumption.
Therefore, checking from time to time that ice sheets are not created and cleaning them when necessary will be interesting. It is one of the maintenance tasks.
Separate the refrigerator a little from the wall
The refrigerator will generate heat to function. that same heat it generates can end up rebounded. Especially in hot months, in summer, this can cause it to have to work at a higher power to always maintain a correct temperature and to prevent food from spoiling.
What you can do in this case is separate the refrigerator from the wall, furniture or any obstacle. It is good that you have a space for the air to pass through as much as possible and prevent that heat from ending up reflected.
In short, as you can see, you can make some small changes or adjustments in the refrigerator to try to save. In addition, you can always see the consumption through a smart plug that you can connect to an access point or Wi-Fi repeater that you have.
