Never do this or your WiFi will be slow and you will not be able to solve it

What mistakes to avoid to have good Wi-Fi

Have a good WiFi connection today it is essential. We have more and more connected devices, especially due to home automation and the Internet of Things. That means that we need good coverage, speed and capacity to connect more and more devices without interruptions. Therefore, it is essential not to make mistakes.

Use any repeater

It is common for us to install a wireless repeater to improve the home Wi-Fi signal. It is a simple device to use and can help improve coverage. But of course, not all are the same. In fact, some can become a problem and even make the connection start to go worse, with cuts and poor speed.

Therefore, avoid using any Wi-Fi repeater. Always inform yourself to acquire the best device. In addition, there is not only the option of the repeater, but you can use a Wi-Fi Mesh system or PLC devices that will also be useful for coverage to reach other places in the house without interference and cuts.

Put the router anywhere

It is essential to position the router well. However, in many cases we place it in any place. Sometimes this happens for convenience, so that it does not get in the way, but other times it is because we have no choice but to install it. Whatever the reason, try to locate the router in a suitable place so that it can better distribute the signal and you will not have problems.

For example, it is a mistake to put the router near other electronic devices. This can affect the Wi-Fi network, especially when you use devices that use the 2.4 GHz band and connect to that band. It is also important that you do not put it in an area covered by boxes, furniture or anything else that could block the signal.

Ideally, it should be in an elevated location, away from possible interference and, if possible, in a central place in the house. In this way you can better distribute the signal without coverage problems.

Not choosing the right band

Today most devices allow us to connect to the band 5 GHz and also 2.4 GHz. However, there are differences between one and the other. The former is best for maximum speed, but is more sensitive to distance. On the other hand, the second one is slower, but more stable and less sensitive to distance.

Choosing well which one you are going to use is going to be essential. That can be key to having a good Wi-Fi connection and that there are no problems with speed, coverage or possible interference that can damage connectivity.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *