PLC and WiFi repeater at the same time, is it a good idea?

In order to improve the wireless connection at home we can use different devices. The objective is to achieve better coverage, greater speed and that the dreaded cuts do not appear. We can use for example PLC devices or Wi-Fi repeaters. However, sometimes the question arises as to which is better or even if something happens to have both at the same time. In this article we are going to talk about it, so you know what to take into account.

What if you have PLC device and Wi-Fi repeater

There are differences between using PLC devices and a Wi-Fi repeater or extender. We can say that PLCs work through electrical wiring, so they are very useful for connecting from one place to another. On the other hand, what repeaters do is receive the signal and distribute it throughout a certain area of ​​the house and thus improve coverage.

We may think of having both options. In this way we can install a Wi-Fi repeater in a room and put some PLCs in another place. This is fully supported and there should be no issues. However, in certain circumstances you could find yourself with limitations and it would not be appropriate to have them connected at the same time.

When is it not a good idea to install PLC devices and a Wi-Fi repeater? It is not a good idea if you are going to put them close. After all, any device that works through wireless networks can create interference. The same goes for any other device that connects to Wi-Fi, so putting several close together can be a mistake.

It is also not a good idea if you are going to connect by Wi-Fi and not by cable. That is, you could use some PLC devices to carry the connection from one place to another and connect by cable, while you can use the repeater to connect wirelessly. It is more convenient for you to use it in this way.

You should also keep in mind that it is one more network that will appear when you search for Wi-Fi. It is one more option for possible attackers to exploit the network and get into your connection. Also, it can be problematic when connecting from your devices.

Know Wi-Fi band connected

Tips to optimize Wi-Fi

What is the best we can do to optimize a Wi-Fi network? Although it is a good idea to have PLC devices or Wi-Fi repeaters, as we have discussed, it is important that you take into account certain tips so that the connection works as well as possible. That is why we are going to give you some recommendations.

  • router location: Something very important is to locate the router well. Ideally, it should be in a central area of ​​the house, from where it can distribute the signal well.
  • Use guarantee devices: If you are going to use a repeater or PLC, it is important that they are guaranteed. Take a good look at the maximum speed, if they are double band, etc.
  • Choosing the right band: Connect to the 2.4 GHz band if you’re far from your router, and opt for 5 GHz when you’re closer and want maximum speed.
  • Do not use saturated channels: Especially if you connect to the 2.4 GHz band, it is important that you do not use crowded channels that your neighbors are using.

In short, as you can see, you can take into account certain tips to improve the speed and quality of Wi-Fi. You can use both wireless repeaters and PLC devices, although sometimes it is better not to use them at the same time.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *