To have a good Internet connection at home, correctly locating the devices is essential. This will allow the wireless signal to correctly reach the areas where we need to have access to the network. Therefore, we are going to explain where you should locate your router or any Wi-Fi repeater that you have at home The objective is that you can connect your computer, mobile or any device, and have access without problems. This way you will achieve good speed, stability and quality.
There are multiple reasons that can affect Wi-Fi signal, but the most common is to have a bad location. You may put the devices too far from the router, the wireless repeater in an area without much coverage or where there may be other devices that generate signal interference.
Sites to put the router and repeaters
The router is the main piece to have a good internet at home. You can’t go wrong there. You can’t put it anywhere, as you might have connection problems. It is essential that you locate it in a good area, where you make the most of the signal. But you should also apply this if you use a Wi-Fi repeater.
isolated furniture
A good place to place both the router and the repeaters are isolated furniture. What does this mean? Furniture that is away from possible interferencesuch as other electronic devices. Do not put it near the television, for example, since there are usually devices that use Bluetooth and that generates interference.
Ideally, you should place them in a raised area, so a piece of furniture can be perfect. This way the router will distribute a better signal. Something similar happens with the repeater. Avoid putting them close to the ground, hidden behind a wall or wall. A piece of furniture that is free of interference is perfect for the purpose of having a good signal.
Areas where they distribute the signal well
This leads us to recommend that it is important to put them in areas where they really distribute the wireless signal well. For example, a central place of the dwelling. In this way, the wireless signal will not be concentrated solely in a specific space in the house, but will better distribute the coverage.
Avoid putting it in cornered places, near load-bearing walls or next to materials that can affect the signal. In the latter, we can include metal furniture, mirrors, appliances that have water, etc. All this will affect the Wi-Fi signal and it is not good to put the wireless repeater or router nearby.
Avoid sources of heat
Another piece of advice is to avoid any heat source. This can affect the performance of devices, such as the router. If it gets too hot, it will not only run worse, but may even stop working altogether. You would have to turn it off and on again to troubleshoot.
Sources of heat are, for example, putting them next to a window where direct sunlight enters. It is also important to put them next to other electrical appliances, such as a television, since they give off heat and it will affect them. In an extreme case, if you had to put it in an area where they get hot because you had no choice, you can always connect a small computer fan. You can use the router’s USB port for this.
Do not move the repeater too far from the router
You should also not place the router and repeater too far away each other. Keep in mind that the Wi-Fi repeater will have to connect to the router. If the distance is too great, the signal will be too weak and it will not be able to distribute the connection correctly. You are going to have problems.
It is best to find a balance. You can carry out tests to see how well the signal reaches a specific area and determine if it is a good area or not to place the repeater. Simply by making small changes, you can see that the coverage is better and you will be able to connect correctly to the Internet.
As you can see, locating the router and repeaters well is going to be essential to achieve a good connection. Moving it away from interference, heat sources and placing it in areas where the signal is distributed well will be essential.
