Tips for connecting TV to the Internet
Keep in mind that not all televisions are the same. That is, not all of them will have the same capacity to receive an Internet signal, for example. But if we speak in general lines, typical errors are usually common. Normally what happens is that the signal goes far when the we connect by Wi-Fialthough there may be other elements that affect the signal.
Get an optimal signal
The first thing you should do is try to get the signal as good as possible. Assuming that you are going to connect wirelessly, what matters is that the wifi signal come as strong as possible. It is the same as if you were connecting a computer, mobile phone or any other device. It is a determining factor.
How can you improve the Wi-Fi signal that reaches your television? The simplest thing is to connect as close as possible to the access point. To do this you have two options: move the router closer to the television or move the TV closer to the router. But of course, this will not always be possible and you will have to look for an alternative.
It is best to use a device that helps improve the Wi-Fi signal in your home and that better reaches the Smart TV. For example, you can install PLC devices that carry the signal from one place to another through electrical wiring. You can also use a Mesh system or wireless repeaters.
Far from interference
Another very important point is to have the television away from possible interference. Keep in mind that there are many devices that can affect the Wi-Fi signal and cause the television to work worse when connected to the network. For example, simply using a Bluetooth headset could cause interference, since it works through the 2.4 GHz frequency.
It is interesting to have the television as isolated as possible. Try not to place other devices nearby. You should especially avoid those that work on the 2.4 GHz frequency, such as devices that have Bluetooth, a cordless phone, or even a microwave.
If you can, better by cable
Whenever possible, the best way to connect the TV to the Internet is to use network wire. The connection will be more stable and you will have fewer problems than if you connect via Wi-Fi. Here, once again, you will have several options to be able to connect it to an Ethernet cable and avoid the wireless network.
The ideal option is to connect it directly to the router through a network cable. This is not always going to be possible, since the router may be in another room and you have to do some installation. If that is not possible, you can always count on PLC devices that will provide greater stability than a repeater. You always have the option of adding a Gigabit Ethernet port to the TV.
As you can see, it is important to place the television correctly so that it connects to the Internet correctly. The objective is to ensure that the coverage arrives well, with stability and without cuts. Whenever possible, it is best to connect it through a network cable and thus avoid problems.
