How to bring the Internet to a point far from the router
There are options for improve coverage and reach different places. For example Wi-Fi repeaters, which is the most common, Mesh systems or PLC devices. But of course, a repeater, for example, cannot work miracles; it cannot make the connection reach several tens of meters.
In that case, what can we do to have Internet in a room that, for example, is really away from the router and is impossible with an amplifier? The best method is to connect by Ethernet cable. Of course, you are going to have to carry out an installation in the house and what you do is take the network cable from the router to that remote area of the house where you are going to need a connection.
There, once you have the installation, you will be able to put a access point. It can even be an old router that you have at home. You are going to connect it to that Ethernet cable, of course as long as it is compatible and properly configured, and in this way that access point will allow you to connect other devices either by cable or by Wi-Fi. You will be able to bridge a great distance and you will connect as if you were next to the main router. You can see the steps to use an old router as an access point.
Therefore, a great option to take the Internet to a very distant place is to have an Ethernet cable installation at home. In this way you can take the connection to another access point, which can be an old router, and thus distribute the connection to that area.
Other good alternatives to have a connection far away
But this is not the only alternative, far from it. A very interesting one that you can take into account is to use PLC devices. In this case the connection will travel through the electrical wiring. Normally there are two devices: one you connect to the router and to electricity and the other to a plug in the area where you need to have Internet.
Unlike a Wi-Fi repeater, the signal will travel through the electrical wiring and will be more stable. You will have fewer cuts and problems. Of course, it is important that the wiring is in good condition, because if it is too old there may be problems and you will not receive the signal well either.
Also, as an alternative you can use a Wi-Fi mesh system. In this case, there are multiple satellites that connect to each other, so they can cover a larger area. Although you will not have the same quality and speed as if you cover the house with Ethernet cable, it is certainly an option to consider.
In short, as you can see, the best way to take the Internet to a very distant place is to use an Ethernet cable in your home. However, you have some more alternatives to bring the Internet to other rooms.
