There are certain household appliances that have significant electricity consumption. Controlling them can help you pay less each month and save money on your electricity bill. This is the case of Fridge, which is a device that has a large consumption. But it can consume more if we use it incorrectly. For this reason, in this article we are going to tell you how you should place the refrigerator properly at home so that it spend less light.
What to do to place the refrigerator and save light
Please note that the refrigerator is the appliance that consumes the most. In fact, you can spend up to 30% of the bill due to this device. Logically there are models that can spend more or less, but you can always take into account certain tips to try to spend as little as possible.
Keep it away from heat sources
The first piece of advice is to put the refrigerator away from heat sources. Think of it as an appliance with the aim of cooling, so anything that can generate heat will force it to consume more resources to function properly. Try not to bring it close to any other device that generates heat.
For example, do not put it near a radiator, or the oven, or the stove. You should also not put it next to a door or window where direct sunlight enters, as it could cause overheating.
Don’t put it too close to the wall
You shouldn’t put it too close to the wall either. The idea is that the refrigerator can refrigerate properly and that the heat that it expels does not bounce. If you put it very close to the wall, that heat will bounce off the appliance and it will have to consume a little more resources to be able to cool.
Therefore, put it in an area where it has as much space as possible. Do not stick it to furniture, walls or other appliances that may prevent the heat from coming out properly.
Other tips to spend less light with the refrigerator
But beyond the location, you can also take into account other recommendations that we are going to give you to prevent the refrigerator from consume a lot of electricity. An essential tip is to avoid opening the door as much as possible. Every time you open the door, the cold from inside comes out and the cold from outside enters. Avoid having the door beyond what is essential.
You shouldn’t put hot things in. If you are going to put food in the fridge, wait for it to cool down completely and then put it in. As you put something at a higher temperature, it will cause the refrigerator to have to consume more resources to keep everything cold. The opposite case is if you put a block of ice or some frozen food.
Also, you can control the temperature. You don’t need the fridge to be less than 5 degrees. Keep in mind that each degree less will cause consumption to increase. Therefore, avoid putting it at a temperature that is too low.
As you can see, you can take these recommendations into account in order to save on the electricity bill when using the refrigerator. You can always use smart devices, in case you have Internet throughout the house and home automation works well.
