Sometimes you may have problems with the Wi-Fi network at home. There may be some devices that do not connect correctly, have a bad speed or the dreaded cuts appear. Although it is something that can happen on many devices, the truth is that it happens frequently on mobile phones. Now what can affect the phone’s Wi-Fi mostly? We are going to talk about it.
It is important to detect what may be the source of the problem and thus take action. It can happen that the phone has a bad Wi-Fi receiver, that there is a failure with the router or even a virus in the device. But if we talk about the main thing, there are especially some factors that are usually present.
Why is Wi-Fi on mobile bad?
Have a bad internet connection on mobile it can bring different problems. For example, you would not be able to watch streaming content in high quality without being cut off, you would not be able to use the cloud correctly, or you would have problems downloading files. Speed and stability are often closely linked.
interference
The first thing that can happen is that you have interference when using the mobile over Wi-Fi. Why is this happening? An example is being very close to other devices that can generate conflicts. They can be Bluetooth devices, since they use the frequency close to 2.4 GHz, as well as other devices that connect via Wi-Fi or even a microwave.
There are also objects that can block the signal. This is the case of a metal plate, a fish tank full of water, a thick wall… Keep in mind that neither metal nor water are good friends with Wi-Fi. Neither are the walls or walls, since they will block the wireless signal and cause problems.
Misuse of Wi-Fi frequency
Another common problem is that you are using the wrong Wi-Fi band. Today, most mobile phones allow us to connect to the band of 2.4GHz and the one of the 5GHz. The first is the one with the greatest coverage and goes further, although it has less speed. The second is the one that allows you to reach maximum speed, but has less range.
Choosing at all times which one is best is key to achieving a good wireless connection. Check carefully at what frequency and you connect and avoid cuts or speed problems. With this, you can make your connection work better on the mobile phone. You can always see if the mobile is dual band.
Too far from the router
Of course, the distance with the router is another factor to take into account. The further away you are, the more coverage problems you may have. It is a very clear cause when you start to have cuts and notice that the Internet speed is not the best. You should always check where you have the router located and what is the distance to the devices you connect.
What can you do if you are having trouble being too far from the router? You can install a repeater, Mesh system or PLC devices with which you will improve coverage. All of them allow you to have a better connection and avoid annoying failures when the signal reaches the mobile phone or any device.
As you can see, these are the main reasons why Wi-Fi goes wrong on your mobile when you connect at home. It is important to check that everything is working correctly and take action if necessary. Sometimes just making a few small changes can make a major connection improvement.
