Reasons why the Wi-Fi repeater goes bad
There are some causes that will especially cause problems when using a Wi-Fi repeater. Therefore, if you take into account what we are going to explain, you will be able to reverse the situation and make it work as well as possible. Sometimes a small change can make a big difference in the speed it gets to you.
It’s in a dead zone
Undoubtedly the main reason why the Wi-Fi repeater does not work well is because it is misplaced. Its mission is to amplify the wireless signal in a specific place in the house, but for this it will need to receive it previously from the router. If you are not in a good place, you will not be able to improve anything.
This is what is known as a dead zone. If you have the repeater in a place where the signal from the router is very weak or even not at all, you will not be able to connect or if you do it will be with many limitations. Therefore, you must place it in an area where it receives the signal well and can distribute it to other devices.
You don’t use the best band
Another common mistake is to use the wrong band. Most devices support both the 2.4 GHz and 5 GHz bands. Each has its advantages and disadvantages. Basically we can say that the first allows us to connect from a greater distance, but the speed is lower. In contrast, the 5 GHz is faster but also more sensitive to distance and obstacles.
Therefore, if you see that the Wi-Fi repeater does not work well, you can try connecting to another band. Perhaps you are too far away and you are using the 5 GHz band and therefore there is instability or you do not have a good speed despite being next to it and it is due to using the 2.4 GHz band, which is slower.
There are many devices connected
This is something that can affect some models especially. The number of appliances that you can connect to the Wi-Fi repeater will depend on each case, since not all are the same. If you have a device that only supports 10 connected devices, for example, maybe you have that many or even more and it’s causing problems.
In addition, it does not mean that there is a maximum amount and that from there it does not work, but that it is something progressive and the more you have connected, the worse the connection will be. It also depends on the use you make of each device, since a connected mobile phone that you are not using is not the same as a television on which you are playing 4K videos in Streaming.
You are not using a Gigabit cable
If you connect by Ethernet cable to the wireless repeater and you see that the speed is not adequate, maybe the problem is with the cable. It is important to keep this in mind since it can act as a bottleneck and you will not achieve maximum speed when you connect to the network or download a file.
It is important that it is Gigabit Ethernet, since that means that you can reach up to 1 Gbps of speed. If you use a Fast Ethernet cable, you will be limited to 100 Mbps and you will not be able to take advantage of the fiber optic rate that you have contracted.
In short, these are the main reasons why this type of device malfunctions. It is important to position the Wi-Fi repeater correctly and use the correct band to always achieve the highest speed and adequate stability.
