Having a good wireless connection at home is essential today. We connect through the mobile phone, computer, we use the television connected to the network and many other devices. In fact, home automation is increasingly present and makes it more necessary than Wi-Fi is stable and have no cuts. But how can we make this possible? In this article we are going to give some advice so that you do not have problems.
What to do to make Wi-Fi stable
You may sometimes see that the Wi-Fi network it is unstable, it cuts off or you lose speed constantly. If this happens, there is something wrong with your connection. You may have something misconfigured or have made a mistake with the router or your devices. Correcting the problem is essential to have a good connection.
Improve router location
if you want to have Wi-Fi stability, it is important that the coverage is good. This can be achieved if you correctly locate the router. If, for example, you have it in a corner of the house and you are going to connect in another very remote area, the network will be very weak and you will not have good stability. You will suffer continuous outages and problems.
Ideally, the router should be in a central location in the home. From there you can distribute the signal to connect from other devices. It is best that you put it in a raised area, for example on top of a piece of furniture.
Avoid interference
you should also avoid possible interference that may affect the Wi-Fi network. Do not put the router near other electronic devices, such as a television or microwave. Also avoid walls or walls that can hinder the signal and cause the speed and stability to decrease.
It is important that the signal is as few obstacles as possible. Again, positioning the router well will help avoid such interference. But you should also avoid putting things nearby that could affect it.
Make good use of Wi-Fi bands
You can connect to the wireless network through the band of the 5 GHz or 2.4 GHz. Today most devices are compatible with both options and choosing one or the other can be a very important change to achieve greater stability, speed and signal quality.
Basically we can say that the 2.4 GHz band is more stable when you connect away from the router, although the speed decreases. On the other hand, the 5 GHz is more stable when there is possible interference with other devices, but the distance is less. It also has higher speed.
Use devices to improve coverage
Do you have problems with coverage? If you see that the Wi-Fi is not stable, surely a common cause is that the coverage be weak. Try to improve it and that the signal reaches your entire home. In this way you will be able to connect devices without problems and you will be able to avoid annoying cuts when browsing the net.
You can use Wi-Fi repeaters, PLC devices or Mesh systems. All of them will help you to take the connection to other places in the house. You will be able to have stable Internet no matter where you are at all times.
Have everything updated
A very important factor for the wireless network to work well is keep everything updated. Here we can mention the router itself, since always having the latest firmware version is essential to avoid security problems, but also to achieve better performance.
But also, you should update the Wi-Fi drivers of your computer. Having the drivers updated is going to be vital to avoid having problems. Always try that the wireless network card is well updated.
In short, with these tips you can achieve greater stability in the Wi-Fi network. It is important in order to avoid continuous cuts and failures when you browse the Internet, whether from your computer, mobile phone or any device.
