If you want to have one good internet connection wireless, in many cases you will have to make some adjustments or use devices. Something common is to use a wireless repeater to boost the signal and that it reaches other areas of the house. But sometimes this is not enough or it can even make the connection start to work even worse. Therefore, in this article we are going to tell you about an alternative when your Wi-Fi amplifier is not enough.
Please note that Wi-Fi repeaters have certain limitations. You can’t put them anywhere, as they need to receive a signal from the router. If they are too far away, the signal will be very weak and they will not work properly. You may also have trouble using them in areas surrounded by walls and walls.
Wi-Fi PLC, a good solution
To avoid this that we mentioned, PLC devices are a good solution. It is basically a pack made up of two gadgets. You connect one of them to the router and also to an electrical outlet, while you plug the second into another part of the house. The connection travels through electrical wiring and you can place it in the area where you need to boost the Internet signal.
Unlike the repeater, they do not connect directly to the router wirelessly. Therefore, there will be less signal loss. You will be able to carry the more stable connection and have access to the network from other devices without so many problems. Very useful to put them in a room in your home that is too far from the router.
In addition, the PLC devices They will allow you to connect devices both by cable and wirelessly. There are models that support both options, so you can connect a television or computer via Ethernet cable, for example, as well as many other home automation devices or any device that has a Wi-Fi connection.
Of course, it is important that you buy PLC devices that are of guarantee. Not all of them have the same speed, nor are they all dual-band or have Gigabit Ethernet ports. Choosing a good model will allow you to connect with guarantees and that the connection works as well as possible.
Use devices correctly
It is important that use the devices correctly PLC. The location you give it is key. Do not put them next to other devices, since they could suffer interference and that affect performance. There are models that have an integrated plug, but ideally you should not connect anything or at least not devices that could cause interference.
You should also not connect them to a power strip. The best thing is that the plugs go directly to the wall, so that in this way the signal goes better and noise is not generated that affects negatively. It is important to facilitate as much as possible so that they work properly and there are no failures.
In addition, another point to highlight is that you should put the PLCs in the same electrical circuit of the house. If they are set to different ones, that can cause them to not work to the maximum and there may be problems. Please review this for a proper connection and avoid common failures.
As you can see, a very interesting alternative to Wi-Fi repeaters are PLC devices. They work through electrical wiring and are a good option to take the connection to other areas of the house and that do not appear cuts.