Normally we associate Internet connection problems with connecting far from the router. The truth is that it is a very important factor, since Wi-Fi loses power as we move away from the access point. But sometimes we can find ourselves in the situation that we are next to the router, we do a speed test and we see that it goes wrong. We can even have major cuts and problems connecting. What is happening?
Why is the Internet bad even though I am next to the router?
There are several reasons why this can occur. One of the most common is being connected to the 2.4 GHz band. Current devices allow us to connect to both the 2.4 GHz and 5 GHz bands. Each has its advantages, but the first is slower than the second. In case you are connected to 2.4 GHz and you do a speed test, even if you are next to the router you will not get the most.
Another cause is having some network card problem. This will cause the speed that reaches the computer, as well as the signal, to be very weak. For example, you may have a network adapter with a physical antenna and it is loose or directly damaged. That will prevent the signal from reaching well.
Also, you could be using a poor quality network card. It is something frequent in some computers that have an integrated network card. It may work poorly or have poor quality and the speed is limited. In that case, what you would have to do is change the card for another external one of higher quality and that is dual band.
One more reason is that there is some system level failure in Windows or the one you use. You could have a virus and that is going to cause the Internet connection to work badly even if you connect glued to the router.
But the problem could be in the router. Sometimes it can become overloaded and have trouble offering a good connection. Even if you get right next to it, you might have limited speed. What we recommend you to do first is to restart the router correctly. Sometimes it is necessary. You can also check that everything works fine.
Tips for the connection to go well
Beyond being close to the router and having good coverage, it is important to take into account some recommendations to make the connection work well. The first thing is to use a network card good and that it is updated. That will help you achieve good performance and get it to work properly.
You should also pay attention to the security of your equipment. Avoid viruses or any type of malware that can slow down the connection. You can install a good antivirus so that it detects threats and can eliminate them before they can affect you. There are many options, but it is good that you check comments and ratings before.
Another tip is to have a good setup. By this we mean using a Wi-Fi channel that is not saturated, as well as using the correct band to achieve the best coverage and speed. If you are going to be connected near the router, it is best that you use the 5 GHz frequency so that it goes faster.
As you can see, there are different reasons why the wireless network can go wrong even if you connect right next to the router. It is important that you carefully review what may be happening and take measures to better navigate the web. Normally you can solve it with small changes that you make.
