When you turn your phone on, it should say “Connected” and show a signal strength indicator. However, it often says “no connection” after turning on. What is the problem?
If you’re reading this, then you’ve probably had this experience: you’re on a trip and you’re trying to make a call, because you’re thinking it’s on airplane mode. But no matter how hard you try to dial, you get the dreaded “No Signal” message.
This is how it usually goes when I turn on my phone and the screen says “No Signal”. Usually I just put my phone away and keep on working. I thought I would show you how to fix this. Go to Settings and then to Mobile Networks. Then un-check the option “Use 3G when available” and then go to “OK” and it should start working.
Lack of signal or connection is a major problem for mobile phones. Users want to use the most basic function of a mobile phone – calling – at their convenience. While there are connection issues in some areas that we can’t do much about, some phones don’t signal even though the network is available. This is a phone-related problem and we cannot blame the network in this case. Some of our readers, especially Samsung users, often complain about the lack of signal on their phones. You try to make a call and find that there is no signal at all, or you get a pop-up window with the message Not registered on the network. These problems can be treated if they occur sporadically and last only a short time, but they can become extremely annoying to the user if they occur very frequently. While this is one of the most common errors you may notice when dealing with no signal on Android, there are other errors as well, such as. B. Network search error, your SIM card does not allow you to connect to this network and Automatic network search or Emergency calls only. Also read : Disable Apple Music auto-expansion on Android
Identify the manufacturer of the problem – SIM card or Android device
Before fixing the problem on your phone, make sure the SIM card is working properly on the other device. You can use a friend’s phone or another smartphone or tablet in the family. This will help you determine if the problem is network or phone related. If the SIM card is functioning correctly and you can make and receive calls and send messages from another device without any problems, the problem is in the device you are using. You can also contact your SIM card provider if the SIM card does not work in another phone. This is a very important step that will help you determine if the problem is related to your phone or not. Once we start troubleshooting the phone, it is useless to identify the network as the problem after many steps. If it turns out that the phone is the cause of the problem, it could be either the phone’s software or hardware. Nevertheless, here are some possible solutions to solve this problem.
Fixed no signal on Samsung Galaxy S, Galaxy Note, LG G, Nexus and other Android devices
Solution 1: Restart the device
The best and most sensible solution to this problem is to restart the device. After the device is rebooted, the system is updated and the device searches the network again. This usually helps, although it may only temporarily fix the problem and come back later. For people who don’t encounter this problem often, rebooting can be a quick and easy solution.
Solution 2: Air mode switch
Many readers have found this a useful solution, and it provides a quick fix to the problem. To activate Airplane Mode, pull down the notification screen on your phone and look for the Airplane Mode icon. Press the icon to activate the mode. Wait 30 seconds and press the icon again to turn off the mode. Once the phone exits airplane mode, it tries to search for networks again.
Solution 3: Check SIM card
If the SIM card is not inserted correctly, there may be no signal or an error may appear on the screen. To solve this problem, turn off the phone and remove the SIM card. Insert the card again and check that it is correctly seated in the unit. If the SIM card is moved in the metal holder, the movement may cause the connection to be lost and you may have a problem with no signal. If you notice the SIM card shifting frequently, take the phone to the manufacturer to see if anything can be done about it, and if the phone is under warranty, to see if a replacement can be arranged. You can also try putting a piece of paper over the SIM card to hold it in place.
Solution 4: Automatic mobile network selection
All Android devices can try this solution quickly. The device will automatically select the cellular network and this should help you solve the problem. To select the mobile network automatically : 1 :
- Go to the Settings menu on your device
- Find and tap the More Networks option.
- Now tap Mobile Networks on the next screen.
- Click Network Operator and select Auto Select on the next screen.
The device automatically scans for networks and attempts to connect to the network as soon as it finds one. This should help you solve the problem.
Solution 5: Correct transmission of radio signal
It may happen that the phone signal is not transmitted as expected. Please follow the steps below to resolve this issue:
- Open your phone dialer and dial *#*#4636#*. Call this number and wait for the results.
- The test menu appears on the screen of your device. From this menu, touch Phone/Device Information.
- Perform the ping test and select GSM Auto (PRL) from the drop-down list.
- Press to switch off the radio.
After this step, restart the phone and check if you can now connect to the network and use the phone to make calls and send messages.
Solution 6: Updating the phone’s software
Your phone or tablet’s software needs to be updated in time for your device to function properly. When your device is updated, the new software brings with it many fixes for known bugs or problems in the current software. To update the software on your device
- Go to the Settings menu on your device
- Scroll down and find About device or About phone, About tablet. Click on it.
- Tap Check for updates, and if any updates are available, download and install them.
After the software update, the phone is automatically rebooted, and after the reboot it tries to connect to an available network. After connecting to the network, check if the problem is solved.
Solution 7: Invalid IMEI
In some cases, the device’s IMEI number has been reset or there is an issue with an unknown IMEI number, which may result in a signal failure or service issue. You need to check if your IMEI number has been reset or is corrupt. And if the problem is with the IMEI number, you need to reset the IMEI.
- Go to the phone dialer and dial *#06#, which will display the IMEI number of your device. If the result is zero, then your device’s IMEI number is corrupted and you need to take steps to fix the problem.
- To solve the problem, dial *#*#197328640#*#* into your phone’s dialer. You can also dial *#197328640#. Dialing this number will put you in control mode of your phone.
- Make sure the Shared option is selected on your device.
- Now choose the first option, which should be Field Test Mode (FTM). If you see that FTM is enabled, disable it. After disabling FTM, press the menu key and your IMEI number should be restored.
- To deactivate FTM, press the Enter key on option 2.
- Remove the battery from the device (if you have a removable battery) and remove the SIM card from the device.
- Wait two minutes and reinsert the battery, but do not reinsert the SIM card yet.
- Turn the machine on and enter *#197328640# in the dialer again.
- Go to the debug screen menu and tap Phone Control.
- Then you need to click on Nas Control and then RRC. In the last step, click on RRC Revision and then on Released.
- Turn off the phone and reinsert the SIM card.
Turn the phone on and check if the problem is resolved.
Solution 8: Factory reset
If none of the above solutions worked, reset your phone to factory settings. When you reset a phone to factory defaults, you are returning the software to the state it was in when you took the phone out of the box. This step deletes all data on your phone and also deletes any applications that may have been downloaded to your phone. Therefore, you should back up all data before restoring the device to factory settings. On Android devices, there is also a backup option in the Settings menu. If you want to back up with this option, you can do so.
- Go to the Settings menu on your device
- To save and reset, press
- In this screen you can enable or disable the creation of a backup.
- At the bottom of the screen is the factory reset button. Press to restore the phone to the factory settings.
After resetting to the factory settings, the phone will automatically restart. Let the phone connect to the network, and then check if the problem is solved or not.
What should I do if a network scan results in an error?
Some of our readers have asked us to find a solution to this error. Since we are dealing with all the problems related to a missing signal, let’s see how you can solve this problem. The answer is obvious, and it seems to work on most Android phones.
- Go to the Settings menu on your device.
- Now find the mobile network settings and press it.
- Stay on the same screen and press and hold the power button and home button on your device until the phone turns off.
- Remove the battery from your device if it is removable.
- Now press and release the Home button and the Power button simultaneously. Do it ten times.
- Then press and hold the power and home buttons simultaneously for at least one minute. This will eliminate any static charge in the phone’s circuitry.
- Replace the battery when it is charged and turn the camera on.
- Do not place the rear cover on the unit.
- If your phone is designed for this, you need to remove and reinsert the SIM card three times while keeping the phone switched on. If you have two SIM card slots, use one to remove the SIM card without removing the battery.
- You are prompted to restart the device.
After the reboot, let the device connect to the network and check if it works as expected. Try calling and texting to see if the problem is resolved.
What should I do if I use a custom ROM and I get this error message?
A no signal error was detected on some devices using a custom ROM. It is recommended to return to the original ROM. Then you know that the ROM is not suitable for your device. The original ROM can be installed from the recovery screen. This process removes all data and applications from your device. Therefore, make sure you have backed up all the important data you don’t want to lose. You can find the correct ROM by looking at the model number of your device, which you can find in About your device in the Settings menu. If you know the model number, download the default ROM from the device and make sure you select the correct one. The ROM will be available as a .zip file. Make sure you don’t unzip the file. Also load GApps for the ROM you want to load. They can be stored in the internal memory or on an SD card. Turn off the device after downloading the ROM and GApps. Now press and hold the power and volume buttons simultaneously until the recovery options appear on the screen. Several options will be displayed and you should choose the first one – Install. Select one of the following prompts asking you to locate the file on your device. When the file is found, select the Confirm Flash option at the bottom of the screen. The default ROM will be flashed on your device. Once the process is complete, clear the cache and select the option to clear the data and reset the device. This is a way to install a stock ROM for your device. There are other options, and you can choose either one depending on how familiar you are with installing ROMs on your device.
What should I do if I think one of the applications is causing the problem?
If you suspect that one of the applications you have downloaded to your device may be the cause of the lack of signal, make sure your device is in safe mode. If your phone or tablet works fine in safe mode, but the problem occurs again in normal mode, the problem is due to an app because all third-party apps are disabled in safe mode.
- Press and hold the power button until the network settings appear on the screen.
- Press and hold the power button and a pop-up window will appear asking if you want to reboot your phone in safe mode.
- Press OK to confirm and continue with the restart.
- After the device reboots, the safe mode appears on the screen.
Make sure the phone works properly in safe mode. If the problem is fixed, one of the applications may be the cause of the problem. You can reset the phone to factory settings to delete all applications. On the other hand, you can reboot the phone to go to normal mode and remove the apps that you think might be causing the problem. After each uninstall, check if the problem is solved. All these solutions can work on all Android devices like Samsung Galaxy, Galaxy Note series, HTC One, LG etc. that have a problem with the missing signal. If these solutions don’t work for your phone or tablet, take your phone to the store where you bought it or to your service provider. You can also read: To set unique ringtones for contacts on Android.
The final step is a factory reset, but don’t forget to back up all your data. The following describes how to reset the data to factory defaults:
- Start by turning the device off.
- Then press and hold the Home, Power and Volume Up keys for a few seconds until the Android logo appears.
- Then release the buttons. Use the volume down key to highlight options and the power key to confirm. Highlight the factory reset option and press the Power button to confirm.
- Then select Delete all user data and confirm.
- Wait a few seconds until the Restart system now option appears and select it. The phone will then reboot and you will have to reconfigure it completely.
There are also issues like no network registration, no network coverage on Samsung Galaxy, AT&T, Version, Sprint, T-Mobile US. The signal error is not a problem of the provider. So if you try a SIM card from another provider, this problem will still occur. See also – Repairing the Galaxy IMEI # and Not Registered to the NetworkI have an iPhone 3G and I’m currently having a hard time getting a signal. I have nothing wrong with my phone and it is not the phone itself because it works fine on other carriers. I thought that it was a problem with my phone’s antenna, so I thought I would check it out. I found this great website that has a tutorial that tells you how to check. It was very easy to check mine and it was not the antenna. So all I did was unplug the phone and restart it and that should have fixed the problem.. Read more about my phone says no service and let us know what you think.
Frequently Asked Questions
How do I fix no signal on my phone?
Your phone may be in a dead zone or you may have no signal at all. This article is designed to show you how to fix no signal on your phone. There you are at the airport, phone in hand, waiting to get online. Suddenly, the signal disappears. Then it comes back. And then it goes out again. What good is a smartphone if you can’t use it?
Why does my phone have no signal?
Phones and tablets may contain a nanometer-sized antenna that sends and receives radio waves, but to most of us, this antenna is invisible. When we are around a cellphone tower, however, our phones will usually show that we are in range. Unfortunately, not everyone is in range of the nearest cell tower, and that is why many people have no signal when they are in a location that is not covered by one of the towers. It’s happened to all of us at one time or another. We go out on a Friday night and have a great time, but the next day when we turn on a phone to see if it’s signal is present, we receive an error message. Why? Because, no matter what we do, the phone simply does not have a signal.
How do you fix no service on iPhone?
Most people that have a problem like this are not really sure what to do, and they have been upset for a long time before they come to me. I have had many people try to fix their own problems by “self-diagnosing” and trying things that did not work. Most people end up with a “dead” phone, which is a phone that will not turn on and does not have a signal. I help people fix their problems and learn more about their phones with a few simple steps, which are: Your iPhone or iPad has a battery, but it doesn’t last forever. In fact, it only lasts about two or three years for most people. If your phone isn’t working right now, it’s likely because the battery is drained and needs to be charged. If you don’t have a charger nearby, it’s time to find one before your battery dies completely.
Feedback,my phone has no signal barshow do i fix no signal on my androidmy phone says no servicephone keeps losing network connectionwhy does my phone say no servicewhy does my android phone say no service when i have service,People also search for,Privacy settings,How Search works,why does my android phone say no service when i have service,my phone has no signal bars,how do i fix no signal on my android,my phone says no service,phone keeps losing network connection,how do i fix my phone if it says no service?,why does my phone say no service,why does my phone say no network connection