Saving on your electricity bill can be easier than you imagine. You just have to be aware of what you consume the most and avoid doing it. Also, sometimes you can touch a few settings, or make small changes, to achieve significant savings. In this article we are going to give you three interesting tips on what you should avoid doing, if your goal is save light and pay less each month.
It is possible that some of the things that we are going to mention are part of your day to day. You can see that if you make any changes you will be able to spend less and better control consumption of your gadgets. In the end, to save on electricity, many factors come into play and the sum of all of them matters.
Bugs that spend a lot of light
Spending more or less on electricity will depend on how your devices are, how long you use them, but also on how you configure them and what electricity rate you have contracted. There are several factors that can significantly influence paying more or paying less each month.
Raise or lower the temperature a lot
The first mistake, the first thing to avoid, is having a temperature too high or too low. In winter, you should not have the heating set to a high temperature. That’s going to make you spend a lot more. In summer, on the contrary; You do not need to have the house at 18 degrees, so you would be spending more than necessary. Having the house at 20-21 degrees in winter and around 24 in summer is a good idea.
Each degree can make you consume about 7% more. It will also depend on how your air conditioning is, what the exact temperature is, etc. But, more or less, you can calculate about a 7% savings every grade you lower in winter and every grade you raise in the summer months.
Not adjusting appliance programs
Another common mistake is not adjusting the home appliance programs correctly. We can name two clear examples: the dishwasher and the washing machine. Normally, these devices usually have a eco program. You will consume less, since it heats the water less and uses less power.
Using those lower consumption programs is interesting. You should always keep in mind whether or not you really need to have them at their maximum. The same happens in a stove, a dryer, etc. Any device of this type, the more power you give it, the greater the consumption. You don’t always need it to be maxed out.
Have very old devices working
It is certainly something that can make your bill soar. If you have an old refrigerator, for example, as well as an old or deteriorated air conditioner, it can cause you to use much more electricity. It is important that you review very well what you have installed at home and avoid older devices.
Although in the short term it is an important investment change old appliancesSurely in the medium and long term you end up saving. Today’s appliances are much more optimized to consume less electricity. You can spend less light and get the same results.
As you can see, it is important that you avoid certain mistakes when using energy at home. The goal is to save on the electricity bill, pay less and not waste electricity. If you use home automation, it is important to make sure that the Wi-Fi of the router works well and thus take advantage of the devices also in order to save energy.
