Which band to connect the TV to
Television is one of the many devices that we can connect via Wi-Fi. As usually happens, we will have the possibility of connecting to the network to one of the two available bands. And this can raise doubts. We want the connection to arrive as well as possible and to be able to reproduce series and movies in Streaming without cuts.
We have to say that there is not one band better than another, but it will depend on the circumstances. If you have the television next to the router, the ideal is that you connect to the 5 GHz band. It is the one that will offer the highest speed, so you can play content in 4K without major problems.
However, this band is more sensitive to distance and possible obstacles. If we are connected too far from the router, the best thing would be to connect the TV to the 2.4 GHz band. It is true that the speed will not be the best, but we will avoid continuous cuts. In addition, the 5 GHz band loses a lot of speed as soon as we get far enough from the access point.
Therefore, the ideal thing to say is to connect the television to the 5 GHz band if circumstances allow it. This is how we will achieve Maximum speed to be able to see content in the highest quality. However, if the router is not nearby and the coverage on this band is very limited, then it would be better to connect it to the 2.4 GHz band.
Ethernet cable, alternative to connect the TV
Beyond connect TV over Wi-FiWhether in one band or another, there is an alternative which is the Ethernet cable. This will provide more stability and, at the same time, speed. The distance at which we connect the device will not matter so much and we will be able to watch series and movies in perfect quality without cuts. You can also connect the computer to the TV.
But here, too, some factors must be taken into account. It is important to use a good cable. To have the best speed, a cable Gigabit Ethernet is essential to not be limited to the maximum 100 Mbps offered by a Fast Ethernet cable.
If you want to connect the cable television and you are far from the router or you do not have an installation done, one option you can do is place PLC devices. These devices are connected to each other through the electrical line. You put one of them next to the router and the other one near the TV. You simply connect an Ethernet cable between the TV and the PLC and you can achieve good speed and stability.
In short, we can connect television in the 5 GHz and 2.4 GHz bands. Each of them can be interesting depending on the circumstances, so you will have to see each case and what is best for you.
