Internet

These devices are ideal for your WiFi to go a long way

Do you need Wi-Fi to reach far in your home? It is quite common that your router cannot reach the areas where you want to connect a device. For example, you might want to connect from a room at the end of the house. You try to connect a computer, television or a mobile phone and you see that it does not work correctly. Perhaps the signal is weak and cuts out a lot or you notice that the speed is not what it should be. In this article we tell you how to take the connection far away at home.

Use PLC devices to take Wi-Fi far

If you use a wireless repeater, which is most common, you’re still going to have problems if you need to go too far. These devices do not always work correctly, since they need to receive a signal to then distribute it. Therefore, if the signal it receives is very weak, you will not have a good connection in the area where you need it.

The alternative is to use PLC devices. With these devices you will be able to take the connection further in your home. They are basically two devices that are connected to each other through electrical wiring. You are going to connect one of them to the router and to a socket on the wall, while the other you are going to put in another socket somewhere in the house.

With this you will get the connection to travel through the electrical wiring. You will be able to avoid the common problems of Wi-Fi repeaters and you will significantly improve the quality of the signal. It is perfect for bringing the Internet to a room that is far away or even to another floor of the house.

These devices are very easy to use and you will find many models available. It is important that you choose correctly which one to buy, that it is of quality and also that you locate it correctly. Choosing PLCs that are fast is important to have a good connection.

Avoid putting near PLC devices

Different types of PLC devices

Keep in mind that there are many models. Some have Wi-Fi connection only, others only allow you to connect through ethernet port and others have both options available. The latter are the interesting ones, since you will be able to connect devices both wirelessly and via cable.

Also, you should pay attention to the speed that support PLC devices. Ideally, they should be dual band and allow good speed both wired and wireless. Note that they also have a Gigabit Ethernet port. This means that they will support speeds up to 1 Gbps and not be limited to 100 Mbps.

Another factor to take into account is the quality of appliances. You should carefully review which model you are buying, see comments and ratings from other people who have bought it before. What you are looking for is for it to work correctly and have a good Internet speed, as well as coverage that goes far. Therefore, choose well.

In short, as you can see, a very good option for the Internet connection to reach further at home is to use PLC devices. They are devices that will allow you to connect other devices from other areas of the house. They work through the electrical network and are very useful.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *