What to do to spend less with the dishwasher
Keep in mind that the dishwasher will use electricity, but also water. If you take into account the recommendations that we are going to give you, you will be able to save on both bills. The ultimate goal is to pay less and achieve a more efficient washing of our dishes. Small changes can mean a lot in the long run.
Fill it up before you light it up
The first is from common sense and logic. When you put the dishwasher, the ideal is to make the most of the resources and have it full. In this way you will avoid putting it for four dishes. Therefore, wait until it is as full as possible and at that moment you can put it to take advantage of the expense that you are going to have.
It’s the same as you would do with any other similar appliance. For example, you do not put the washing machine to put two shirts. In this case it is the same and to take advantage of the water and electricity that it is going to consume, it is important that it is full.
Use half load
Sometimes you may have no choice but to put it without being full. For example, if you are going to go away for a few days and want to leave the dishes clean before leaving. In that case what you should do is use the half load. It is an option that dishwashers have and you will spend less electricity and water.
What it basically does is decrease the power and resources that it is going to use. It doesn’t need to work the same as if you had a fully loaded dishwasher and you can save on your bill somewhat.
control the temperature
If there is something that consumes a lot in dishwashers, it is heating the water. It is a process that needs to spend electricity. Therefore, control the temperature it can make you save money on bill and spend less. Logically, you will have to take this into account depending on some parameters.
For example, you should think about whether the dishes you have put are very dirty or not. If they barely have any food leftovers, you most likely don’t need very hot water to clean them. There you will be able to save and simply put it at a lower temperature.
Use eco programs
Of course, one more tip is to use echo programs. The dishwasher has several programs available and that you can use depending on what you need. Normally we do not need to use the most powerful, longest-lasting programs that, ultimately, will consume the most. We can take advantage of this type of program.
Therefore, when you go to put the dishwasher, choose carefully which program to use. Whenever you can, use the eco and you will save on the electricity bill. Most likely you don’t need more than that.
keep it in good condition
Another important point is to keep the dishwasher in good condition. Perhaps in the short term it will not make you save electricity and water, but in the long run it will. If, for example, you put dirty dishes with food that you have not removed, that can gradually clog the ducts and make it work worse, so it will end up consuming more water and electricity.
It is also advisable to always dry it after use, open the lid when it finishes working so that hot air can escape, etc. These small gestures will keep it in good condition.
Choose the time to put the dishwasher
The dishwasher consumes a lot, there is no doubt about that. As much as you try to follow these tips that we have given you, it will still consume a lot of that time that it is working. So can you do something to spend less? That will depend on the electricity rate you have contracted, but if you have a rate with hourly discrimination Yes.
The idea is to put the dishwasher on the cheapest hours. If you have a regulated rate, you will find a different price depending on the time slot. Also, if you have a free market rate, you may have a contract that is cheaper at certain times. Take advantage of that to put this appliance.
