We all want our Internet connection to work well, with good speed and without interruptions. If we connect via Wi-Fi, we must bear in mind that these problems may appear more frequently than if we navigate through a network cable. However, there are some changes that you can easily make in case you see that something is not right. We are going to tell you in this article what can you change on your Wi-Fi.
Changes to improve Wi-Fi
so that the wireless network work properly, multiple factors come into play. It is important to have a good router and a well-functioning receiver. Also that at the system level everything is well configured. But there are certain changes that sometimes it is necessary to make to avoid problems.
change channel and band
One simple change you can make to your router is use another channel distinct. There could be interference if your neighbors are connected to the same channel as you or even to a nearby one. If you live in an area of apartments, with many houses around you, this is more likely to happen.
You can also try changing the band. Especially the gang of 2.4GHz It is the one with the most interference. Using 5 GHz can help you get faster and avoid problems. Of course, keep in mind that the 2.5 GHz band is the one that goes the furthest, while the other is more limited.
Try to improve the location of the router
Another change you can make is relocate the router. It is quite common that we have it somewhere where it does not really emit the signal well and we do not take advantage of Wi-Fi. In many cases we leave it in the same place where it was located for the first time when doing the installation and that can be an error.
Ideally, it should be in a central area of the house. From there you will be able to distribute the signal better. You will be able to connect from other devices with fewer problems and make it work with greater stability. Put it in an elevated area, since that way it will give a better signal.
If you use a repeater, see what is nearby
In addition to the router, in case you use a WIFI repeater You should also check that everything works correctly. Be careful with devices that you may have nearby. Avoid devices that work via Bluetooth, such as headphones. Also household appliances such as the microwave, since it works through the 2.4 GHz frequency.
The best thing is that the repeater is in an isolated place, without interference problems with other devices. Nor should you put it in a corner area, from where it cannot distribute the wireless signal well.
Prepare your PC or mobile
On the other hand, something that you should do is make sure that you have your devices well prepared to connect to the network. One change you can make is update network card drivers and also the operating system, so that everything works correctly and without problems.
If you use outdated drivers, this can lead to problems connecting to the Internet correctly. You could have limitations and the connection would not work as it should. Just something as simple as updating can improve the network. However, at other times you will have to find out what the problem is and you might have to kick intruders off the Wi-Fi.
As you can see, these small changes in your network can come in handy. If you have problems browsing, if you see that the speed is not what it should be or there are cuts, some adjustments can come in handy so that everything works better.
