Internet

Why WiFi goes wrong even if you use a repeater

What makes the Wi-Fi repeater not enough

When we use a WIFI repeater what we are looking for with it is that the wireless signal reaches other places. When we see that this is not enough and we still have speed problems or cuts, we can think that there is some problem, limitation or some mistake that we are making.

is poorly located

The first thing is that the repeater can be misplaced. Although it is a device that will distribute the signal to other places, it will have to connect to the router and receive a signal. If you have it placed in a dead zone or where there is very weak coverage, it will not be possible for other devices to connect to it.

Therefore, you should look for a location where it receives the best possible signal and thus be able to distribute it to another place in the house. You should avoid placing it near electrical appliances and other devices that may interfere, walls or walls that block the signal, and ideally it should be in an elevated space, isolated from any possible interference.

You use the wrong band

Wi-Fi repeaters are usually dual band. This means that you will be able to connect to the band of the 2.4GHz and also to that of the 5GHz. The first is the one that allows you to connect devices from a greater distance, although the speed will be more limited and you will not be able to achieve the maximum.

On the other hand, the 5 GHz band is the one with the highest speed but it will suffer more when you move away from the access point. Therefore, it is important that you connect to the appropriate band in the repeater and in this way you can increase the capacity according to the circumstances and have better performance.

Differences between 2.4 and 5 GHz

It doesn’t have enough power

Another issue to keep in mind is that the Wi-Fi repeater you are using may not have enough power and that limits use. Here we can mention several options. One of them is that you don’t have a good capacity to receive and distribute signal, but it could also happen that the maximum speed is very limited.

Generally the latter, the maximum speed, is going to be limited by the fact that it only works in the 2.4 GHz band. However, you should also take a good look at the capacity of the device and to what extent it could improve your coverage of Internet and not pose a problem.

You use a device in the wrong place or limited

But the problem may not be with the repeater itself, but with the device you are using to connect. Perhaps it is in a bad place, such as next to other equipment that affects the signal or in a dead zone where there is no coverage due to its location surrounded by large walls.

It may also happen that device is very limited having a network card that does not have a large capacity. The distance it can work may not be enough to connect to the repeater. You can see what causes problems in the Wi-Fi of the laptop.

Alternatives to improve coverage

If you see that you are having problems using a Wi-Fi repeater and, for whatever reason, you are not receiving a sufficient signal to be able to navigate normally, you can count on some alternatives. In this way you will achieve a higher network speed and you will not have the annoying continuous cuts.

One option is to use PLC devices. What these devices do is use the power line to be able to send and receive an Internet signal. Basically there are two devices: one of them connects to the router and to electricity, while the other connects to electricity in another place in the house.

You can also use a hotspot. To do this, you must use a network cable to connect it to the router and, from that place where you put it, distribute the signal wirelessly. You can even use an old router for this purpose and give it a second use.

In short, as you can see, you can use different alternatives to a Wi-Fi repeater and improve the signal. Sometimes they don’t work as well as we would like, but we can take into account certain tips to optimize the connection to the maximum.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *