The router It is without a doubt an essential device to have a good Internet connection. There are many models, with different features that can allow speeds to be increased and overall performance to improve. However, whichever one we use, we must take into account some tips. We are going to show some errors that can cause a overheating and thus affect performance.
What causes the router to heat up
The fact that there is a router overheating it will mean that cuts appear, there may be a loss of speed and, ultimately, it works worse. But in addition, it can also affect the useful life of the device and see that suddenly it no longer works and we must buy a new one. Therefore, there are some things to avoid.
Put it near a window
One of them is not to put the router near a window. Sometimes we place it on a table or piece of furniture where it bothers less or where we think it will be a good place to distribute the signal well throughout the house. But what if it goes in direct sunlight through that window and our router is next door?
That will certainly cause it to heat up more. Even if it only gets direct sunlight for a while, it can be enough for it to overheat and damage some connectors or have continuous failure.
Place an electronic device next to
It is also a mistake to put any other appliance close. It is common for many users to put it near a television, computer and other similar equipment. They take advantage of the fact that there is a plug nearby and can even connect a device by cable without having many complications.
But of course, once again we are facing a problem if we think about the heating of the device. Any electronic device can emit heat and this affects the cooling of our router. That’s where the problems could start so that the speed is optimal and the annoying cuts do not arise.
put things on top
Something similar happens with anything we put on top of the device. For example a book. The router usually has different holes for heat to escape and to be able to cool down. If we cover them, that can lead to overheating and stop working properly or even turn off.
Therefore, what you have to do is place it in a place that is as isolated as possible and that has nothing above or below it. Placing it on top of a piece of furniture, for example, is a good idea so that it distributes the signal better and avoid putting things on it.
Not maintaining general cleanliness
Also, another problem is that the router can accumulate dust and dirt. It is something that sooner or later will happen in any device that we use. However, the router sometimes goes more unnoticed and we don’t do a general cleaning because we think it won’t need it.
The ideal is to prevent it from accumulating dust. You have to clean the nearby surfaces well and also the case itself. Always being careful not to get it wet or cause any damage that could harm more than the dirt itself, of course.
In short, these are some mistakes that you should avoid so that the router does not overheat. What we have seen could be decisive for optimal operation and not having any type of problem that could affect the speed and quality of the Internet signal.
