The objective is to maintain a good lighting, but without this involving a large consumption of electricity. You will be able to notice a decrease in electrical consumption, at least when using light bulbs and lamps. Depending on your case, you may notice it more or less. However, the sum of everything is what will allow you to pay less at the end of the month.
Save when using lights
Without a doubt, the best way to save when using lights is to turn them off whenever possible. When they are not on, consumption is practically non-existent, beyond the small permanent contact that there will always be. But, beyond this clear advice, there are other methods that you will be able to use in your daily life.
Motion sensors
One of them is to use motion sensors. There are more and more smart light bulbs that use this technology. Basically what they do is detect presence in a room or knowing when a person passes in front of a light bulb. This way, it can be turned on or off without having to do anything manually.
It is very useful for traffic areas, where many people can pass by. For example, you can put it in the hallway of a building with several homes or even inside your house, for areas such as a garage, the entrance door, etc. Those bulbs will turn on when you enter, but will go off when you leave. They will not be on longer than necessary.
Lighting detectors
Another method is to use detectors brightness. You won’t always need to have the light bulbs on in the same way. You may be in a room where direct sunlight comes in, for example. It is not the same early in the morning or at dusk as it is in the middle hours of the day.
Therefore, what these sensors or luminosity detectors do is adjust the bulbs. They will make them light up more or less, depending on the brightness. It could even turn off completely, in case they are on on a cloudy day and suddenly the clouds are gone and there is a lot of light.
Voice and remote control of bulbs
Smart light bulbs also have the function of being able to control them remote form. Simply with an application on your mobile, you will be able to decide when to turn something off or on. You will even be able to do it by voice, although not all models have this capability. For example, you could enter a room with boxes in your hand and give the command for it to turn on. At the exit, the same. You will avoid leaving lights on.
The goal is to have greater control over turning light bulbs on and off. You will be able to avoid leaving lights that you don’t need, something that would translate into consuming more electricity and that would be a problem.
smart plugs
You can apply this to lamps, mainly. Basically, what you do is connect them to a plug or power strip intelligent. You will have greater control to turn them off and on, so energy consumption would always be lower and you would avoid consuming more than you really need.
You have the option to schedule the on and off. For example, you may want to turn on a house lamp only at certain times. By plugging it into a smart plug, you can correctly program when to turn it on and when to have it turn off automatically.
Change old light bulbs
One more tip, although it is not exactly a method as such, is to change the old light bulbs you have at home. You can replace all of them with LED type and that will make you spend less. Also, if you buy smart models, you can apply some of the methods we have explained above and save more.
There are different types of bulbs and keep in mind that LEDs consume less than low consumption bulbs. It is interesting that you check which ones you have in your home, especially if they are areas where they spend many hours on.
In short, these are some options to save on your electricity bill when using light bulbs at home. Making some changes and adjustments can help you spend less and not have to always have good lighting.