What to look for in an iPhone microphone
The microphone that is natively integrated into an iPhone does not have a very good quality. That is why more professional alternatives are sought to record sound at the highest quality like a true professional. In the options that can be found, different factors must be taken into account to make the best possible purchase. These factors are as follows:
- Compatibility: It is important to know if the microphone you are going to buy is compatible with your iPhone. This is achieved by seeing that it is not necessary to have any application or driver installed to be able to use it. In addition, it must also be borne in mind that in many cases it will be necessary to have an adapter, especially when talking about a microphone with a jack cable.
- Noise Cancellation: If you are going to work with the microphone outdoors it is important that it has a suitable noise cancellation system. In this way, the microphone with the integrated chip will be able to capture only the voice without environmental noises that can be really annoying.
- Directional sound: it is important to have a microphone that can pick up all the sound around you. This is important as otherwise it will only be picked up from one side which can be really annoying, so it is important that it be 360 ° or omnidirectional sound.
- Price: price is undoubtedly one of the most important factors. You can find a wide range of prices. If you don’t need to have a great sound quality, there are microphones with a reduced price, but you can also find other models that are much more professional and with a higher price.
Adapters needed for your iPhone
To use many of the microphones that are going to be seen in this article, you need a Lightning to Jack or even USB adapter. That is why we show you the best adapters below.
Lightning adapter to female jack, compatible in this way with all the iPhone on the market and also for the iPad. It has an intelligent DAC chip whose mission is to convert a digital audio signal into an analog audio signal. In this way the objective is to have the highest original sound quality with noise suppression and high suppression of interference.
It has a special protection system to avoid breaking the cable in the event that it ends up bending. This is because it has a nylon braided cable like charging cables. Also, in the key points that connect with the iPhone and that can suffer a break, it has an extra protection system.
Lightning to 3.5 mm jack adapter certified by Apple itself with MFi. In this way it is guaranteed to have a 100% guaranteed compatibility and also an original and faithful audio. It is important to note that it is compatible with all iPhones that have a Lightning port and are on iOS 10.3.1 or higher.
You do not need to have additional audio software to use this jack adapter. It will only be necessary to connect the microphone to the adapter and start using it by recognizing it immediately. To avoid any type of breakage, it has a high quality aluminum alloy and PVC coating to guarantee sound transmission.
This is a recognized brand when it comes to accessories such as charging cables. It also has high quality Lightning to jack adapters compatible with all iPhone on the market and also available in different colors to suit the design of your device. It is only a few centimeters in size and has a good protective coating to prevent breakage when bending.
An easy connection with a microphone that has a 3.5 mm jack input can be established in this way. It uses a Plug & Play system making it unnecessary to have any application. It has a sample rate of up to 48KHz and noise filter to give you clear quality sound without interruptions.
If you want to make a professional recording with the iPhone, the most comfortable thing is to have a lavalier microphone. These can be worn on a t-shirt or jacket in a comfortable way to pick up sound easily. Here are the best options available.
This lavalier microphone features state-of-the-art technology for automatic pairing. It has 2 built-in microchips for automatic identification that allows it to start working the moment the 3.5mm jack is connected. It has wide compatibility with devices where the iPhone is included in addition to Android or a PC. The cable has a size of 6 meters built in anti-interference material with a mental connection that guarantees a fast and stable transmission.
It features 360-degree audio pickup and a high-sensitivity condenser microphone head. In this way the general sound can be captured with all kinds of details as well as transparent and smooth. The connector includes an indicator light on the microphone so that its working status and connection condition can be verified in real time.
Microphone designed for professionals especially for iPhone and iPad as it does not have a jack connector, but instead has a Lightning connector directly. This means that you do not have to be using adapters that we have previously commented on. It is an omni-directional microphone that allows you to capture the clear sound around the entire microphone to capture everything that is heard around.
It also has a noise cancellation function so that only the voice is captured. In this way the ambient sound can be suppressed so if you are going to make recordings on the street to do a podcast or an interview, this is the best option you can have. It has a 6.5 meter long cable so that the device does not have to be flat, not having to install anything since it simply must be connected to the iPhone and start recording.
Specially designed for the iPhone and iPad by having a Lightning connector. It is compatible with all iPhones on the market, since the interface has an MFi certification granted by Apple itself, so it can be used with total confidence. Although it must be borne in mind that once this microphone is connected, the speaker is disabled.
We are facing an omnidirectional microphone with a sensitivity of more or less 3 dB and a frequency of 50-20 jHz. The sound recording is 360º to be able to capture all the sound. It is not necessary to have any application connected since it has a Plug & Play system so you simply have to make the connection and start recording. The cable is 2 meters in size which is lightweight and easy to carry.
Rode is one of the best brands out there when it comes to microphones. It is a portable microphone that has been specially designed for use in film or television. It has a fairly small size so that it is easy to transport including a Lavalier click so that it has the necessary strength to be attached to a shirt or jacket so that it does not fall at any time.
The capsule is omnidirectional and has the necessary technology to be able to have the best sound pickup. A series of wind protectors are included in the pack itself to prevent the sound from being distorted with weather conditions. It is undoubtedly ideal in these situations so its purchase is recommended if you are going to record outdoors.
Best table microphones
Beyond the lavalier microphones, if you are going to record a podcast or interview at home, the most recommended are table microphones. Here are the best options to use with your iPhone.
This microphone is designed to be used in many devices such as computers and mobile phones. This is because it has two different adapters to be able to connect via Lightning and also via USB-C. It is compatible with numerous devices regardless of their operating system. With a simple physical button you can mute the microphone and it also has a noise filtering system. The brand promises to reduce 90% of ambient noise.
With all the technology that it integrates, a clear, smooth and crisp sound can finally be obtained in front of the microphone. The microphone also includes a 3.5 mm jack input to connect your headphones and monitor the audio recording in real time. In the microphone itself you can find different buttons that act as a condenser to adjust the result to what you are looking for.
Professional microphone that has a frequency response of 50 Hz to 16 kHz so you can capture your voice clearly and with high fidelity. That is why you will be free to sing, play, or record a podcast. It does not need any type of additional software so that it can work correctly in the devices as it is Plug & Play, so you simply have to connect it and start your recording.
The support that includes is adjustable in 180º and with the possibility of connecting headphones to be able to divide the audio input and output. It is specially adapted to the phone as it only has a 3.5 mm jack connector. This makes it necessary to have an adapter that is not included. In addition, it can also be used with a sound table.
Traditional microphone that works through a 3.5 mm jack cable. It has a 100 Hz – 10 kHz frequency range and an electret condenser. It has a sensitivity of -58 dB with an error range of 2 dB above and below. The length of the cable is 1.5 meters and it is really light and small to be easily transported anywhere.
In the pack itself, the brand includes a solid base to guarantee maximum stability. In this way you can be free of vibrations and with a perfect hold of the microphone to prevent it from falling. Without a doubt, even if it is a simple and inexpensive microphone, it is one of the best options to consider if you do not need something very professional to make recordings.
What microphone do we recommend?
There are many options that we have discussed throughout this article. With regard to lavalier microphones, we must recommend the brand’s YOTTO It includes a Lightning cable and not a jack so it is quite easy to connect it to an iPhone. It also has a firm grip to prevent it from falling easily when worn on a jacket or a T-shirt. All this guaranteeing the quality of the sound by being omnidirectional and including the necessary hardware to have noise cancellation.
In the case of table microphones, the brand Aveek It is one of the best for the versatility it offers when it comes to connection. It integrates different adapters in the pack itself to be able to connect it to any device. It also integrates different controls on the microphone itself to be able to mute the sound and also act as a condenser to adjust the bass or the gain you want it to have.