Having a good router is important for the connection to work well. Now, regardless of whether you use a current, quality model, it is equally important to use it well. Therefore, in this article we are going to give you some simple tips that you can put into practice to improve router quality and let your Internet fly. Maybe you have connection problems and only with these adjustments you begin to notice that the speed increases and you no longer have interruptions.
What should you do to make your router work better, more stable and you can connect devices to the network at a higher speed? That’s exactly what we’re going to talk about. It will all be closely related to the way you place the device. That is one of the keys to always achieving optimal performance and reducing problems.
Changes to make the router work better
There are many reasons that can cause a router to go bad. Sometimes it is due to hardware failures, other times due to poor configuration or simply because the devices we use are not of quality. But there are usually some factors that are usually present and one of them is location.
Change of location
The first change you can make to make your router fly is change location. Put it somewhere else, where you can take better advantage of the signal. The ideal is in the center of the home, where coverage is well distributed and close to the devices you are going to connect. There is no point in putting it on one end of the house, since you would be wasting coverage.
Where can you put it? For example, on top of a piece of furniture, in the elevated part. This will make the signal more distributed. Do not put it near the ground, nor right next to a wall or wall. It is best to put it away from any material that could block the signal and without a doubt a large wall is a clear example.
Remove things that interfered
But you should also remove things that may be affecting the signal. There are objectives that are very bad for the router and can make the Wi-Fi start to do much worse. For example, don’t put it near a metal sheet. You should also not put it near appliances that have water, such as a refrigerator. That will affect the wireless signal.
It is best that it be isolated, away from any interference of this type. Even other devices can affect it, such as those that use Bluetooth. By operating at the 2.4 GHz frequency, this will cause the Wi-Fi to experience interference and start to work worse.
Check Wi-Fi channel
One more adjustment you can make, this time in the settings, is to check What channel is the Wi-Fi connected to?. This is important, since if you use a very saturated channel, you may have problems. It happens when you have many networks nearby, for example if you live in a building with many homes around it.
The objective is to use a less saturated channel. It is in the 2.4 GHz band where you are going to have the most problems. You can always know which channel and band the Wi-Fi is connected to. This will help you make the connection more stable and work at higher speeds.
As you see, you can make these changes to your router to make it fly. The idea is to achieve a good connection, so that you can connect devices with all the guarantees and avoid problems. Simply by locating the router correctly, moving interfering devices away or changing the wireless network channel, you will be able to notice an improvement.