Internet

These are the most common mistakes when setting up a WiFi

Errors when configuring a WiFi

We all want the speed to be good, the connection to be stable and no cuts to appear. But of course, for this we must follow some guidelines to avoid intruders, that the Wi-Fi router works well and there are no complications that negatively affect the network when connecting.

Keep factory settings

The first mistake, and which is also very common, is to keep the values ​​that come from the factory in the settings. This means leaving the same network name, the same password, the key to access the router, etc. This is a problem, as this can limit the performance of the connection and also have security-related complications.

Our advice is to change these types of settings whenever you are going to configure a new WiFi router. It is convenient to put a different network name, of course change the passwords and configure it in the best way so that it can offer optimal performance.

Not locating the router well

Without a doubt, another mistake is not locating the router well. This can cause us to not have access to the network correctly. If, for example, we put it in a corner of the house and we are going to connect to the other end, we would be wasting the WiFi connection and we would not be able to navigate correctly.

The ideal in this case is to place the router in a central location of the house, from which it can distribute the signal well to all parts. In addition, it should be placed away from appliances and other devices that may interfere with the signal. It is important that it is away from walls and walls that affect.

To think that repeaters work miracles

If you are going to configure a WiFi network, you cannot think that the repeaters are going to work miracles and take coverage anywhere. You must take into account the limitations that exist and how you must manage the devices so that the signal loss is minimal.

You will have different options. There are WiFi repeaters, but also Mesh systems or PLC devices. You should check what compensates you the most according to your needs and thus configure the WiFi network in the best possible way so that the speed is optimal and avoid the dreaded cuts.

Errors when using PLC sockets

Not choosing the frequency well

If you connect via WiFi and you are going to configure a device for it, you must choose the frequency at which it is going to connect. Modern devices can connect to both the 2.4 GHz band as well as 5 GHz. Choosing which one we connect to is going to be decisive so that the speed arrives well and no cuts appear. It is important to know the connected WiFi channel and band.

In general terms, we can say that the 2.4 GHz band is the best for connecting far from the WiFi access point. It is less sensitive to distance and possible obstacles. However, the one that will offer the highest speed is 5 GHz, although we will have to connect closer.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *