Normally, a factor that we take into account to achieve a good connection is the distance to the router. Logically, the closer we connect to this device, the better. Using Wi-Fi at 20 meters is not the same as doing it right next to it. Now, there are other aspects that we must take into account. Therefore, in this article we are going to talk to you about something that you may not take into account, but that is even more important than the distance to router.
The idea is that you can have a Internet connection as stable as possible, with good speed and quality. Sometimes just making a few simple changes can make a big difference. You may notice that the signal reaches further, stronger and you have fewer problems connecting devices.
Beware of Wi-Fi interference
An important problem that can affect your Wi-Fi is the interference. This can significantly weaken the signal, make it travel less far, limit speed, or even prevent you from connecting devices to the network. It is something that you should take care of and avoid whenever you can, both on the router and on other devices.
But what can cause interference? A clear example is the devices that use 2.4 GHz frequency to work. We can name some, such as a microwave or a cordless telephone. If you have them near the router, you could have problems using the wireless network. It will weaken the signal and make it more difficult to connect.
You should also keep in mind that there are devices that use Bluetooth that can generate interference. For example, we can name some such as speakers, controls, keyboards… Since they also operate at the 2.4 GHz frequency, they can cause conflict with Wi-Fi. You will notice problems if you place them close.
Where can you have these interferences the most? Mainly, in places where you are going to have many devices. A clear example is near the television. Maybe you have Bluetooth speakers, a cordless phone, a remote control… In that place, when you go to connect the TV or any other device to Wi-Fi, you could have problems.
Avoid making mistakes
What we recommend is to move away these devices that can generate conflicts. Don’t put this kind of device near the router, nor the equipment you are going to use to connect to the wireless network. Locate them in such a way that they are isolated and this way you will avoid problems with these interferences.
Something you can do is connect to the 5 GHz frequency when it is possible. This will help you avoid interference from the 2.4 GHz band, which is where there may be most. This is where the devices we have mentioned come into play and you could have difficulty browsing the web.
You can also choose to connect via cable, whenever you can. If you notice interference, using the network cable can avoid problems. Of course, you will need a takeaway facility ethernet cables from the router or use PLC devices. The idea is to avoid connecting wirelessly.
In short, as you can see, you can suffer interference on your Wi-Fi. It is essential to avoid problems, as they could affect the speed and stability of the network. You can always create Wi-Fi heatmaps and see how the connection reaches different places.
