With these devices you will no longer want to use the router’s Wi-Fi

Have Wi-Fi problems from home and you can’t achieve good speed and stability? Although there are different options to improve the wireless network, the truth is that it is difficult for it to work perfectly if you move too far from the router. Therefore, in this article we are going to talk about a device that you can use and that can be useful to connect without having to opt for Wi-Fi and, furthermore, from any corner of your home.

Although you can always carry out an installation to have a network cable throughout the house, you really do not need anything like this for what we are going to show you. It’s about choosing PLC deviceswhich you can place where you really need to have a connection and not depend on whether the Wi-Fi is working well or not.

PLC devices to improve the network

What are PLC devices? It is a kit, normally of two devices, that are connected through the electrical wiring. Unlike other devices, such as Wi-Fi repeaters, they do not connect wirelessly to the router, but use the electricity in the house. This allows the connection to be taken further and with greater stability.

They are a very interesting option when you do not want or cannot connect to Wi-Fi and achieve good stability. If you need to connect from a far away room, where the wireless network does not reach well, you can use the PLCs to improve connectivity in your home, regardless of the distance to the router.

In addition, these devices allow you to connect appliances both Wi-Fi and cable. Many models have Gigabit Ethernet ports, so you can connect your television, computer or any compatible device, also by cable and thus avoid wireless networks that can be more problematic.

Keep in mind that Wi-Fi usually presents more problems than the network cable. It can have interference, loss of speed with distance and dead zones where the signal does not directly reach. In these cases, the best thing you can do is connect via network cable and make the connection work better.

Avoid putting near PLC devices

Choose quality devices

You will find many models available, but our advice is that you choose a quality one, with guarantees. If you buy a device that does not have good features, you are not really going to be able to improve your Internet connection properly. You will be able to have problems connecting, even by cable.

You can look at features like whether or not it has ports gigabit ethernet. This allows you to reach speeds of up to 1 Gbps and not be limited to 100 Mbps. You can also look at the maximum speed supported by the PLC devices you are going to buy. The higher it is, the better for your goal of having a good connection.

Also, it is interesting that you see if they are dual band. Although we have mentioned that with these devices you will want to forget about Wi-Fi, it may always be necessary to connect certain devices. If it is dual band, it means that you will be able to connect to both the 2.4 GHz frequency and the 5 GHz frequency.

As you can see, using PLC devices is a good option to improve the connection at home. You can use them in areas where you have more connection problems, to avoid having to connect via Wi-Fi and to be able to use a network cable for greater stability and speed.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *