Maybe you have the maximum internet speed hired, but don’t really take advantage of the connection. This can happen for various reasons, but you will be able to take steps to improve the connection. We are going to give you some advice so that you have a fast, stable network and also avoid cuts. You will see that simply by making a few changes, you will be able to make the most of the connection you have contracted.
Having a bad internet connection can be a problem. You can have limitations when viewing streaming content, such as Netflix, downloading or using the cloud. Therefore, sometimes there is no choice but to use devices that allow the connection to be taken to other places.
Why don’t you take advantage of the connection
Sometimes you can do a speed test and realize that you get much less than what you contracted. You think it may be a problem with the company or you even decide to change to another, even higher rate. But these limitations will continue if any of the cases that we are going to raise happens to you.
old wires
A fairly common reason is having an old network cable. This is going to make you limited. If you use an Ethernet cable that you have at home, perhaps from when you had ADSL, it may be fast ethernet. That means that it will be limited to a maximum speed of 100 Mbps symmetric.
In order to really take advantage of the contracted fiber optics, you will have to use a Gigabit Ethernet compatible cable. In this case, the maximum speed that you are going to reach is 1 Gbps symmetric. You need to have a cable that is at least CAT 5e. You will also need to have compatible devices.
Bad Wi-Fi receiver
Another reason why you don’t use your Internet connection correctly is having a bad Wi-Fi receiver. It is quite common in laptops, since when using the receiver that is integrated into the motherboard, sometimes it does not have the necessary quality to reach a good speed and we find ourselves with limitations.
What you can do is something as simple as buying a new receiver, which you can connect via USB. make sure you have Wi-Fi 6 support, since this way you will achieve maximum speed. They are a device that is sometimes the size of a flash drive, so you can take it anywhere.
You can see some options of Wi-Fi receivers.
misplaced router
It is also possible that you have misplaced the router. This is very important to really take advantage of the Internet connection, because if you have it in an area where there is interference, next to a large wall or metal furniture, that will cause the signal to cut off and not go as we would like.
It is best that you put the router in a central area of the house, located in an elevated position and away from everything that can affect Wi-Fi. With this, you will have a wireless network of higher quality and speed.
As you can see, sometimes it is possible that you do not make the most of the Internet connection that you have contracted. It can happen for different reasons, as we have explained. Perhaps you have bad wiring, a poor quality Wi-Fi receiver, or the router is not in the right place. Solving it is in your hand. You can always improve Wi-Fi on Windows 11 or any system.
