To have a good Internet connection, it is essential position the devices well. The router is key, but it is also key if you have a repeater to boost the signal. If you make mistakes, you may notice that the connection quality is weaker and you will have problems connecting devices to the network. Therefore, we are going to tell you which are some interesting places for you to locate both the router and a repeater that you may have at home.
The most important thing is that you avoid typical mistakes, such as placing them too close to possible interference or objects that could block the signal. You shouldn’t put it near heat sources either, since that will make it start to work much worse, with common problems that impair performance.
Places to locate the router and repeaters
It does not matter if you have an old router or it is a new one that you just bought. Neither if it is a very powerful repeater or a more limited one. Whatever type of device you use, it is very important that you choose well where are you going to put them. This will help you avoid problems and you will be able to surf the net correctly.
Furniture in the center of the house
An example of a suitable place to put the router or a repeater at home is in some piece of furniture in a downtown space of the house. You will be able to have a better signal in the different areas of the house and you will not be limited to only one corner. You can apply this whenever you need to install a new repeater, for example.
But why in a piece of furniture? It is interesting, since you will be able to place them in a higher location. In this way, the signal will reach your devices better. Avoid placing it near the ground or next to a wall that may block the signal. Also, a wooden piece of furniture is perfect since it is not a material that affects the wireless signal much. Avoid a metallic piece of furniture, for example.
Away from the kitchen
Another tip is to put the repeater and router away from the kitchen. Why do we say this? There may be some household appliances that will negatively affect the quality of the signal. You could have problems with the microwave, when it is turned on, since it uses a frequency close to 2.4 GHz and that will generate interference.
You could also have problems with other appliances, such as a refrigerator. On the one hand, they can contain a lot of metal and that will affect if you have the router nearby. Also, having water will make the wireless signal work worse. It is another material that can affect negatively.
avoid windows
You shouldn’t put them near the window either. This is so for several reasons. On the one hand, if you have the router or a repeater near a window, it could receive direct sunlight. That will cause overheat and it will start to work worse. You could have continuous cuts and failures when connecting devices.
Also, being near a window you will be wasting coverage. Unlike if you put it in the center of the house, the wireless signal will reach the street, where you are not really going to connect. It could even be a problem for your security, since possible intruders will receive the signal. Therefore, always place them away from the window. An example is an interior room, near where you are going to connect and that does not have windows.
In short, as you can see, these are some places where you should locate or avoid locating your router and repeater at home. If you put it wrong, you could have problems getting the WiFi to appear. It is important that you follow these tips and thus you will make the connection work better.
