Getting a good Wi-Fi connection is not always possible. Sometimes the signal is weak, problems appear to achieve a good speed, stability and, ultimately, the devices do not connect correctly. Why is this happening? Although there are different reasons, something that you must be very clear about is locate the router very well. We are going to show you some objects that you should not have around.
Yes, put certain things near the router may cause wireless network failure. You could notice that the signal arrives worse, that there are continuous cuts or loss of speed. The same thing can happen if you put those same objects very close to any Wi-Fi receiver, such as a repeater, a computer, etc.
Things to keep away from the router
These things that we are going to show, it is convenient that you have them as far as possible from your router. Never put them right next to it, as that will make it work worse. You may not notice something drastic, such as a total blockage of the wireless network, but you can see that the signal is more unstable.
Mirror
Something that you should not have near the router is a mirror. They are widely used decoration elements, but they can be a major problem when it comes to wireless networks. It is better that you avoid having it close, since it will cause signal bounce further. This will cause the signal to not go as you would like and you will have problems.
There are certain materials and objects that are especially negative for wireless networks. This is a clear example. Be careful with putting decorative mirrors right next to the router or putting this device where there is already a mirror placed.
Metal Print
Nor should there be a metal sheet, or metal furniture, or other metal objects. It is a material that will cause the wireless signal to block and not pass correctly. Once again, be careful with the decorations that you are going to put around the router, since you could notice that the signal begins to lose strength.
Therefore, think twice if you have or are going to put something metallic near the router. The same in case you have a repeater, Mesh system or any other device that is going to connect to the wireless network.
Water
If he water It’s also not a good friend of Wi-Fi. Anything that contains liquid is going to cause the wireless signal to be weak or completely blocked. For example, do not put a fish tank with water right next to the router, nor certain appliances that can contain water, such as a refrigerator, washing machine, etc.
Also be careful with pipes, radiators and the like. Even if you think that it will not affect you excessively, it is a component that can cause significant problems when you go to connect to the network wirelessly.
Bluetooth devices
In this case, the problem comes from interference. The devices bluetooth, such as headphones, speakers, controls or any other type, work through the 2.4 GHz frequency. That will cause the Wi-Fi to have interference and not work as it should. You could have problems if you put these devices next to the router.
The same is going to happen if you have a cordless phone or a microwave. They are also going to use the 2.4 GHz frequency and that is what causes problems. Be careful with this and check very well what you are going to place near the device.
something that generates heat
Here we can name many things. Basically, it is not a good idea for the router to overheat. Do not put any device that gives off heat nearby, such as a television, a video player, etc. Try to get as far away as possible any source of heat that may be.
You also have to remember that it is not good to put the router near a window where direct sunlight enters. That is an error, since this will make it get hotter and work worse. It could even shorten its lifespan substantially.
As you can see, there are certain devices and objects that you should move as far away from the router as possible. Avoid putting these things near your device, as you may have trouble getting the Wi-Fi network to work well. The ideal is to have the router in a good place, from where it distributes the signal correctly.
