If you connect the TV via Wi-Fi, you may have problems. This can happen because you are too far from the router and the signal is weak, but it could also happen if the Smart TV It has a receiver that does not work well or has low capacity. The alternative is to connect it by cable. But of course, if you are very far from the router, you would have to have a Ethernet cable let it get there. It is not always possible, so we are going to give you some alternatives.
You can take this into account when you prefer connect cable tv. However, you could also apply it to any other device that has an Ethernet port and you want to have greater stability or speed. You will have different options and you can always add a Gigabit port to the Smart TV.
Connect cable TV
When using Wi-Fi, you may have problems if there is interference, a thick wall, or simply the distance is excessive. On the other hand, by using a network cable it is possible to avoid many problems and make the connection more stable. Of course, it is also advisable to have everything well prepared.
Use an old router
The first option you have is to use a old router that you are not using. As long as it is compatible and you configure it well, you can link it to the main router and ensure that the signal reaches other places in the home. Although you can connect them by cable, in this case it would be by Wi-Fi.
Once that second router receives a signal, you will be able to connect devices via cable or wireless network without problems. You can connect your television to that router through an Ethernet cable, without the need for it to be very long. Just make sure the router is not too far from the TV.
Install PLC devices
An alternative is to use PLC devices. They are devices that serve to carry the connection from one place to another in the home, through electrical wiring. They usually come in a pack of two. You connect one of them to the router and an electrical outlet, while the other you put into another outlet, in another place in the home.
As in the previous case, what you do is connect the cable television to that PLC that you are going to place nearby. You will be able to connect to the Internet and achieve greater speed and stability than if you connect via Wi-Fi directly to the router. An option to avoid typical coverage problems.
Mesh System
You will also be able to use a mesh system. Unlike a repeater, this option is made up of several satellites that will connect to each other and not directly to the router. It is ideal for covering the entire home, as it can cover an area of several hundred square meters.
You can connect your cable TV to one of those satellites that you install nearby. This way, you will have a connection without having to use the television’s Wi-Fi and you will be able to watch streaming content without interruptions and without suffering the usual problems that usually exist.
In short, these three options will allow you to connect your television to the Internet via Ethernet cable even if you are very far from the router. You will be able to achieve greater stability, avoid cuts and speed problems. Make sure you have a quality cable and use devices that are also in good condition.