All this that we are going to mention can affect you regardless of the router model you have. It doesn’t matter if it’s an older device or one you just bought; in all cases you may have problems and your wireless signal may be affected. Therefore, we invite you to take certain measures to avoid it.
What to move away from the router
Simply by making a few adjustments, you can notice a significant improvement in the wireless connection. You can see that the Wi-Fi reaches better, with fewer cuts and without the usual problems that you may have had. You will be able to connect to the network normally.
Bluetooth devices
The first thing you should move away from the router are the devices that use bluetooth. The reason is that they use the 2.4 GHz frequency, which can cause conflicts and interference. Do not put them near devices that you are going to connect to the wireless network, as they can have a negative effect and you will have problems.
For example, we can name Bluetooth speakers, headphones, controls, keyboards… Any device you have that uses this technology could cause problems and you will notice that Wi-Fi is starting to get worse. Don’t put them near the router.
Appliances with a lot of metal
Metal is a bad ally of Wi-Fi. if you are close large appliances, that have a lot of metal, that could affect the signal. For example, we can name a refrigerator. In addition, this device that we mentioned has water, which will also be negative for the wireless network and you will have problems.
Any object, a metal plate or anything that is made of this material, will affect the Wi-Fi signal. Try to get these things as far away as possible, to achieve optimal coverage and not have those annoying problems.
heat sources
Here we can name basically any device. However, there are some that are more obvious. A clear example is television. If you put the router very close to the TV, which is common, it can be a major problem. You might notice that the appliance overheats and that is going to make it start to go wrong.
At a maximum extreme, the router could stop working. It overheats and is not going to be able to resolve requests correctly. But there are also more intermediate problems, such as loss of speed, it starts to malfunction at a given moment, etc.
Microwave
The microwave is another device that you should get as far away from the router as possible. You will also use, in operation, the 2.4 GHz frequency. That can lead to interference and conflicts. You are going to have problems connecting devices to Wi-Fi and you will notice that it starts to get worse.
Although it is not so common to have the router next to the microwave, and it only affects when it is turned on, perhaps you have the kitchen nearby, in the next room, and that may be enough to have interference problems.
Wireless phone
Yes, a cordless phone is another device that should not be kept in close proximity to the router. It is one more device that works in the 2.4 GHz frequency (although some models also work on 5 GHz). This can cause conflicts with the wireless network, when you connect other devices.
In this case, the ideal is to put the router away from the phone. They are going to be devices that can cause problems with each other, so it is convenient to have them in different places and it would be a mistake to place them on the same table, for example.
In short, as you can see these are some devices that you should have as far as possible from the router. You may have interference problems for using the 2.4 GHz frequency, but also for being metallic devices. The objective is to achieve optimal operation, without cuts and to have a good speed.
