do you think there may be someone connected to your electrical network? This is a serious problem, logically. Although it is not something as common as having your Wi-Fi stolen, far from it, it is something that could happen. Therefore, in this article we will tell you a very simple method to find out if someone is tapping your light. You will be able to do it quickly, without having to leave the house or call your electric company.
Check if electricity is stolen
You will have several options for Know if your electricity is stolen and they all go through consulting the meter. You can do it physically, but also through the Internet. Of course, in the latter case you must be registered on the marketer’s page and be able to see the counter in real time to carry out this test. You can do it from the mobile application too.
what you are going to do is go to the accountant, that as we mentioned you can do it physically or through the Internet, and write down the total consumption. You will be able to see that figure at any time and it increases as you spend energy. It is something that is in continuous movement, so the amount you write down one day will change in a while depending on how much you spend.
Once you have written down that number, immediately you turn off all the switches Of electricity. This will turn off all the devices that you have connected to the electrical network. Be careful because this includes the refrigerator, logically, so you shouldn’t leave it like that for too long. The ideal way to know if your light has been punctured and electricity is stolen is to wait 30 minutes or so.
When that time has passed, what you are going to do is check the counter again of the light. If it is exactly the same, with the same total consumption that you wrote down half an hour before, it means that no one is connected to your electrical network. On the other hand, if you see that there has been some consumption, then it means that something strange is happening and it is likely that your electricity is being stolen.
LED flashing, other signal
Beyond this test that we have mentioned, you can also go to the digital counter and you will see a red led. As long as there is some consumption, it will be flashing. If there is no consumption, the light will be fixed. If you have turned off all the switches and you see that the LED is blinking, it could mean that someone is connected to your electrical network.
Furthermore, when accessing reading mode, you will also be able to see the instantaneous consumption. This is something that you can also see from the application or website of the marketer. You will be able to know directly what the electricity consumption is in your home. If after lowering the switches you see that it is not at zero, there is something.
In short, as you can see, you can easily find out if there are intruders in your electrical network. You will be able to see if someone has been able to connect and is stealing your electricity without you knowing it. You don’t need to wait for a very large invoice, but with these simple steps you can find out quickly. If you have a home that is automated, make sure you have uninterrupted Internet and be able to connect devices.