Keep in mind that not all televisions spend the same. A very old model is not the same as a much more current LED screen. Nor is a large screen the same as a much smaller one. However, in all cases you will be able to save on the bill if you follow some advice.
Changes in the TV to save light
Sometimes, simply by doing a few small changes or adjustments We can achieve lower electricity costs. We can see that a device, whatever it is, uses less energy without necessarily affecting consumption. Television is a clear example and you will see that it does not only consume the device itself.
Avoid connected devices
The first thing you should do is be careful with the devices you connect to television. This can cause electricity consumption to increase. For example, you may have a game console plugged in, a video player, speakers, controls… You will not always be using them, but having them connected will increase energy consumption.
A very simple example is having devices such as a HDD. You may use it sometimes, but you don’t need to always have it connected to the TV’s USB port. With this, all you get is that it is constantly consuming electricity. After all, every device, no matter how small, needs electricity to function.
Therefore, we advise you not to have additional devices connected to the television. When you need them, for example when you are going to use the game console or a hard drive, you just plug it in at that moment and that’s it. You will avoid that additional and constant electricity expense.
Do not leave it in Stand By
On the other hand, another change that you can make is to prevent the TV from being in Stand By. What does this mean? It is basically the red led that stays on when you press the off button with the remote. Even if the screen is not on, the television remains at rest to turn on as soon as you press a button.
It is also known as phantom consumption and in many cases it can amount to 10% of the total bill. It’s not just television, but it’s a pretty clear example. It also happens with chargers, small screens of household appliances, a laptop always plugged into the current, etc. In all these cases, a simple gesture such as turning them off can help you use less energy.
To avoid leaving the television on Stand By, what you can do is use a power strip. If it is also an intelligent one, you will be able to control it remotely. Of course, it is important that the Wi-Fi of the router works well so that the signal arrives correctly and there are no cuts. With this, you will have greater control over your devices.
In short, as you can see, you can make small changes to the devices you use at home to save energy. In this case, we have talked about a couple of recommendations that you can put into practice on your television to save on your electricity bill each month.
