Something that usually happens when the Internet connection is not working well is that we think about change rate. We can believe that by having a higher speed, we will have greater speed. However, the reality is that you usually do not need that speed increase. What you are going to need is to make some adjustments so that the connection more stable and it works better. For this reason, we are going to give you a recommendation so that you can make a change and make your connection work better, without the need to contract another rate.
Have a stable and fast connection It is important. It is for downloading, using the cloud, watching streaming content, making a video call… In all these cases, if it is unstable, cuts off or the speed is bad, you are going to have problems and it is necessary to find the reason to solve it.
Make Wi-Fi reach better
In many cases, the problem is that the Wi-Fi does not reach well. You connect from your computer or mobile phone and you notice that the speed is not what it should be, there are cuts and problems. This is most likely due to a bad router placement. Perhaps you connect from far away and the signal will arrive very weak.
What can you do to make the Wi-Fi reach better? something basic is locate the router well. Do not put it too far away, or in areas where it may have problems. For example, do not put it next to a wall or thick wall. Nor near materials that may affect it, such as a metal sheet or furniture, an appliance that has water and the like.
Avoid interference that can affect both the router and any other device that you want to connect to the Internet. A clear example is the devices that use Bluetooth that you can have near the television: controls, speakers, etc. By operating on the 2.4 GHz frequency, they can negatively affect the wireless network.
Ideally, the router should be in a central area of the house, in the elevated part of a piece of furniture. In this way, you can distribute the connection better. Avoid putting it near other devices, as these will also generate heat and cause the router to work worse.
Use other devices
For your connection to fly, you may need to give it a boost. Instead of contracting another more expensive and faster Internet rate, something that will not improve the situation, you can use a Wi-Fi repeater, PLC devices or Mesh systems. In all these cases, you will be able to achieve greater coverage.
The objective is boost signal that reaches the devices that you are going to use to connect to the Internet. That is key for everything to work well. You will be able to watch streaming content without cuts, download or use the cloud. If you do a speed test, you will notice higher speed, lower ping, and less dropouts.
As you can see, instead of changing the Internet rate and paying more, you can opt for these alternatives that we have shown. First, try to improve the location of the router so that the Internet signal reaches other areas of the house. Second, if necessary, use a device that enhances coverage.
