For save on electricity bill, something essential is to control the devices with the highest consumption. A clear example is the Fridge, which could even amount to 30% of the total bill. Avoiding making mistakes is essential, but sometimes we believe that what we are doing is positive, when in reality it could be worse. We are going to explain a common mistake when trying to spend less with the refrigerator. We are going to explain what you should do.
What is the mistake? Many people believe that having the full fridge of things makes you consume more. They think that in summer, for example, it will have to work at a higher power to cool food. However, that is not so. It is even worse to have the device empty, since it would consume more electricity.
Filling the fridge helps save
The more you fill the fridge, the better to spend less energy. It is true that you will need to cool everything you put in and that will mean wear. However, once the contents have cooled, it will need less power to maintain that temperature. But, in addition, in summer it will be very useful to spend less electricity.
The reason is to avoid hot air inlet from outside. Every time you open the door, warm air is going to enter the refrigerator. If you have it empty, that air will not meet any barrier. This means that the exchange will be greater, so the appliance will have to work at a higher power to be able to lower the temperature again.
On the other hand, if you have a very full refrigerator, all those foods will act as a barrier. They will prevent so much hot air from entering from outside and, at the same time, they will keep the temperature better inside. Therefore, the fridge will have to work at a lower power and you will save on the electricity bill.
So if you are afraid of overfill the fridge in summer, thinking that it will consume more electricity, is a mistake. It will even be good if you put a lot of things in it, since that will help maintain the temperature and you will avoid having to work at a higher power, which translates into paying more on the bill.
Avoid opening it too much
Beyond whether or not the fridge is full, what you should always keep in mind is the importance of avoid opening it too much. Never leave the door open, as this will negatively affect consumption. Every time you open it, it loses cold temperature from outside and gains hot air from outside.
Logically you will have to open the door to get things out, but you should do it as little as possible and only for the essential time. Think carefully about what you need to take out before opening the door. If you do this, you will help the device use less energy and it will have to work at a lower power.
In addition, you should not place the device near heat sources, such as a window through which direct sunlight enters or an appliance such as an oven. Any source of heat will cause the device to have to work at a higher power and that will be a problem. If you use home automation and have a smart fridge, make sure there are no problems with the router’s Wi-Fi and it works perfectly.
