When the Wi-Fi network becomes saturated, this translates into problems achieving good speed, stability errors or even making it impossible to connect a device. Therefore, to prevent this from happening, we are going to explain to you what you may be doing wrong that will cause your Wi-Fi to become saturated. We are going to give you some useful tips that you can put into practice to avoid problems and have a great wireless connection.
Although it is important to have a good router, keep it updated and always use devices in good condition, the way you use the network will also have an influence. That is why it is essential to avoid making mistakes that could cause the signal to be unstable, cause saturation and those annoying cuts.
Prevent Wi-Fi from becoming saturated
Keep in mind that every time there are more devices connected to the network. You have several cell phones at home, tablets, computers and many home automation devices, such as a light bulb or a plug. All of this can have an influence, especially if you do not take measures to prevent it from affecting and being a burden on the network.
Use only one band
The first mistake is using a single Wi-Fi band. Generally, this is usually 2.4 GHz. It is precisely the frequency that is most often saturated. It is more common for it to cause problems and, furthermore, some devices will only be able to connect to this band to use the Internet.
Our advice is that, as far as possible, you also use the 5 GHz frequency. It is also the one that will provide the greatest speed. You can connect your computer, a television, your cell phone if it is compatible, etc. Of course, it is advisable that you only connect the devices that are close to the access point.
Connect to a saturated channel
Another mistake is to use a saturated network channel. This can happen if you are connected to a channel that your neighbors use. It can be the same channel or a nearby one. This will cause problems, interference, and being more saturated will make the connection start to go worse, slower and unstable.
You can always see which channel you are connected to and also be able to check which ones are freer. This way, you can connect to another that allows your devices to connect to the network with more guarantees, without those annoying interferences.
Have devices you don’t need
Of course, something basic is to have too many devices connected to the router. Although these devices are designed to accept quite a few pieces of equipment today, the truth is that the more you have, the more problems will appear. Therefore, be careful not to have too many connected to your home network.
For example, you can unplug devices that you only use occasionally. You do not need the television receiver to be connected to the router, if you are not really going to use it. The same with any other equipment that you may have in your home that could be causing problems.
In short, as you see, all this could affect your wireless network. It is essential to prevent it from becoming saturated and you can always take some measures to make the connection work as well as possible, with good speed, quality and stability.
