Have PLC devices At home it is a good option for areas where Wi-Fi does not reach well. They work through electrical wiring and allow us to connect both wirelessly and through an Ethernet cable. However, sometimes they can start to go wrong. You may notice that the signal does not arrive well, there are interruptions or the speed is not what it should be. Why is this happening? Although there are different reasons, in this article we are going to focus on one of them.
It’s all about what you plug in near Wi-Fi PLCs. There are certain devices that can be a burden for these devices. When they are on, they could generate problems that affect performance or even notice that it is impossible to connect normally and without suffering annoying cuts.
Do not plug in high-power devices
The way PLCs work, which is through electrical wiring, already gives us clues as to what can happen if that wiring is in poor condition. But it could also happen that there are appliances and devices connected, which interfere. For example, it is not a good idea to connect PLCs to a power strip.
Now, the question we are going to focus on in this article is why connect high power appliances It’s a bad idea if you have a PLC. If you connect an oven, for example, that has a power of 2000 or 3000W, that will influence these devices that carry the Internet connection through electrical cables. It will cause problems and the connection will not go well.
Connecting a lamp, for example, is not the same as connecting a high-power device. Therefore, it is essential that you avoid placing Wi-Fi PLC devices near appliances that consume a lot of energy. Especially be careful with the kitchen; This is where you can turn on fairly powerful appliances, such as an oven, dishwasher, etc.
The best is that move them as far away as possible of these appliances that can cause problems. The more isolated the PLCs are, the better to make the connection work well, without interruptions and without problems. It doesn’t matter if they are PLCs with or without Wi-Fi.
Choose quality devices
Regardless of how you place your PLCs, it is essential to choose devices that are quality. This will help you achieve a good connection and avoid problems that may arise. You will come across many models available, but not all of them will work well or offer guarantees.
You can always search ratings and comments In Internet. You will be able to see what other users think who, like you, have previously purchased them to improve the connection. You can even read reports and analyzes showing how they respond in real life, when the Internet connection at home needs to be improved.
In short, as you have seen, it is not a good idea to plug in appliances that have high power near PLC devices. They can negatively affect signal quality and cause problems. It is essential to locate them correctly and also choose a model that is guaranteed.