Don’t you know how to enter the BIOS of your PC? We show you how to do it

So the BIOS is an essential configuration tool for users with advanced knowledge and is far enough away from the rest that they end up running a bad system configuration through it. So it is more than possible that your PC is not working at one hundred percent of its capacities due to having certain inactive functions in the BIOS. So if you have a high-end Gaming PC, you will always do well to get the most out of it.

Now, there are many different ways to enter the BIOS from our system, below we are going to tell you about the most common of all.

Enter BIOS during boot

Mark Key
ASUS DEL for the -A-Series, F2 or ESC for the rest.
Hewlett-Packard ESC, F1 F10 or F11 depending on the model
SAMSUNG F2 for your PCs and F10 for your ultrabooks
Sony It can be F1, F2 or F3. If you have a VAIO then it will be the assist key
TOSHIBA F1, F12 or the ESC key.

The different brands of pre-built computers, as well as motherboards that are sold so that we can assemble our own PC are assigned a key that when pressed on our keyboard during system startup allows us to enter the BIOS. If you do not know, therefore, the key to press, you just have to look at our table and press the key that we mark in it to have direct access. By the way, if your computer model is not on the list or you do not know the brand of your motherboard, you have to bear in mind that the most general key for this procedure is usually the key DELETE

This is the most frequent way of accessing it, unfortunately the computer boot process cannot be stopped and many times we do not have time to enter the BIOS quickly enough, since if your computer has fast startup activated then you will not will allow time to press one of the specified keys. In that case, don’t worry, there are other ways to do it, which we are going to tell you about below.

How to enter BIOS from Windows

The first way to access the BIOS from Windows is to do it from the system settings. This is in the menu started with a cogwheel icon so you only have to click on it to enter the configuration. As always, the started menu is accessed by pressing the key with the Windows icon on the keyboard or by clicking the same icon on the taskbar, usually located at the bottom.

  • Once inside, go to the section Updates and Security.
  • Once inside, we will go to the tab Recovery.
  • Within this tab we will press the option of advanced boot.

Windows Advanced Options

After doing this, the PC would restart, but it will not do so in a normal way but with a software prior to starting. Within it we must select the option Problem solving, Then in Advanced Options and, finally, we will press on UEFI Firmware Settings.

Access from the start menu

windows menu enter BIOS

The process that we have described in the previous section can be too messy and slow for most users. However, do not worry, since there is a much simpler method to enter the BIOS than the one we just saw. The operation is as simple as going to power options. Once there, all you have to do is squeeze at the same time the Shift key, up arrow just above the CTRL key on the keyboard, while doing click with the mouse on the restart option.

This will take you to menu from Advanced Startup Settings that we have already seen in the previous section, as far as from here, the steps to follow are exactly equal to which we have already described a moment ago.

Using a boot disk

Disk Boot Windows Menu

There is an alternative option that is none other than the use of a Windows emergency boot disk to enter the BIOS, which is ideal if the operating system does not load you and is independent of the one you are using, so you can use this method if you are a Linux user. Of course, it is not valid for Apple Macintosh since its boot sector is different from that of a conventional PC.

The only trade-off for this method is that you will have to have the BIOS configured to access from the USB as the first boot device, so in this case it is the fish that bites its tail. Something that we recommend you to have, since it can be good for you to diagnose from a Linux distribution, to check that the storage units work well or that when they start up they show the blue screen of death or BSOD.

Once inside the boot disk, we just have to click on repair your computer, select problem repair, UEFI Firmware configuration and after that, give it a restart. Which will cause the computer to boot from the BIOS.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *